• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Inquiry about current replica percussion revolvers

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks for that summary. I plan on casing a Remington New Model Army. I am looking at two, the Cimarron and the one offered by Taylor's. Both have a color-case frame with blued cylinder and barrel. I know historically that the Remington was blued, but I like the looks of this version.
Me too.
IMG_1171.jpeg
IMG_1165.jpeg
IMG_1169.jpeg
IMG_1172.jpeg
 
Personal opinion is that post-pandemic Piettas are easily as good or better than current Uberti revolvers. Pietta sometimes has a grip-to-frame fit issue: easy fix. I have both, and like both. Some folks think the short arbor issue on Uberties is a big deal. I'm not so sure. Then again: I'm no expert. I think we are fortunate to have both manufacturers in this day and age.

Uberti short arbor fix takes only a few minutes.
Well since he was asking about Remington replicas I suspect he’ll be happy with the Uberti cylinder pins, which are all of adequate length. 😂
 
"I suspect he’ll be happy with the Uberti cylinder pins, which are all of adequate length".

I know of one Uberti that had an adequte arbor. It was an early one.
 
Midway had a sale on BP revolvers so I picked this SS Uberti up for a really good price.

Excellent fit and finish, flawless functioning.

I especially like how they put the cautionary stampings on the underside of the barrel!

View attachment 313895
I like both of my Uberti 1858 Remingtons. If money were not an issue I would try to find the Pedersoli Target Shooter 1858. Over 1,000 clams if you can find one.
Those pieces have progressive rifling like the originals. Receivers are forged not cast. Barrels are made in Germany by Hege IIRC. They are hand fit and tuned. Beautiful and accurate right out of the box!
Here is a picture of my Uberti Remingtons.
IMG_4837.jpeg
 

Attachments

  • Untitled - Version 2.jpeg
    Untitled - Version 2.jpeg
    343 KB
  • IMG_0350 - Version 2.jpeg
    IMG_0350 - Version 2.jpeg
    918.7 KB
  • Untitled - Version 2.jpeg
    Untitled - Version 2.jpeg
    215.6 KB
  • IMG_1258 - Version 2.jpeg
    IMG_1258 - Version 2.jpeg
    2.9 MB
  • IMG_0046 - Version 2.jpeg
    IMG_0046 - Version 2.jpeg
    705.7 KB
  • IMG_0350 - Version 2.jpeg
    IMG_0350 - Version 2.jpeg
    918.7 KB
Last edited:
Pieta Target Shooter 1858.
The Pedersoli is same basically. I believe Uberti for frame, and parts and the Germans for the barrel. Hand fitted and tuned as well.
These are generally produced with HEGE-tools on CNC machines. For HEGE, they are machined at Beretta-Uberti. That system is a HEGE-Uberti, with the frame not casted but forged, and the barrel, grip frame and cylinder have the importer Neumann “N”, Pietta's importer in Germany. These are especially produced according the wishes of HEGE, Uberti, Pietta and Pedersoli.
The German Lothar-Walther-barrel has .oo8" deep rifling in 5 lands and grooves with progressive rifling. Those with both German and Italian proof marks are tested in both countries after full assembly and/or repair. Those assembled in Italy typically have only Italian proof marks. And those with the "repair" proof and regular proofs were repaired in the country that the repair took place in. Every item has passed the proof house test according to CIP regulations.
 
Last edited:
"I suspect he’ll be happy with the Uberti cylinder pins, which are all of adequate length".

I know of one Uberti that had an adequte arbor. It was an early one.
Jim, he was enquiring after Remingtons, which have cylinder pins of adequate length. I couldn’t resist yanking your chain, no offense intended…
 
I like both of my Uberti 1858 Remingtons. If money were not an issue I would try to find the Pedersoli Target Shooter 1858. Over 1,000 clams if you can find one.
Those pieces have progressive rifling like the originals. Receivers are forged not cast. Barrels are made in Germany by Hege IIRC. They are hand fit and tuned. Beautiful and accurate right out of the box!
Here is a picture of my Uberti Remingtons.View attachment 313964
The one with the two screwdrivers has some serious polish!

Did you do that or did it come that way?
 
To summarize the "research" I conducted throughout the winter of 2023-24 I would offer this. I'd decided to acquire new 1851 and 1860 Colt replicas to replace my old ASM (Cabela's circa 1993) models. After weeks of every morning scouring every web forum and YouTube channel I could find and talking to a few real people, I went ahead and bought Pietta for both models. Aside from ridiculously placed roll markings and being somewhat over-springed, I have no issues with either gun. Both cleaned up beautifully and needed very little tweaking. Pietta has definitely come a long way since Covid. Bottom line? If it's all about cosmetic appearance, buy Uberti (and pay more). If it's all about actually shooting them, flip a coin.
 
Last edited:
Back
Top