bldtrailer's latest activity

you can use marker on the lock area that touches barrel it will mark the high spots and can stone the lock flatter to fit using a...

if a .50 it should have a 1-66 barrel #40 drill cloth 490 ball good lube . the pan can be deepened and polished mirror bright to get the...

https://www.dixiegunworks.com/index/page/product/product_id/6228/category_id/375/product_name/TP0503+Mainspring+-+For+DGW+Kentucky+Style+...

https://www.dixiegunworks.com/# check here under gun parts...

if all else fails try here https://accuratemolds.com/

I would pull the lock and use soot from a candle or marker on inside of pan area and reinstall the lock seeing what's rubbing and...

no just the way the sun highlighted it chambers finish oil over 3 wood dyes 1st amber yellow, lancaster maple and cherry loral mountain...

Allen martin red maple dale johnson siler lock getz 42 inch barrel 1-72 all else from Dixons (inclueding lock) my attempt of a Dickert rifle

Ok I use a Costco table with collapsible legs I had to sandbag the legs to add weight make it more solid but it workedand used this...

try a tallow based lube it will prevent burn , but if your barrel is cut rifling , cut patches might need to smooth out the burs same...

wipe all surfaces with 91% alcohol rock , frizzen pan and use light motor oil to lube . re prime often

did you say Bobby Hoyt

https://www.muzzleloaderbuilderssupply.com/mbs3cart/agora.cgi?cart_id=9817984.5140&next=25&product=Flints%26Ignition they show french...

https://stonewallcreekoutfitters.com/flints/ good people good flints good prices