D Yager's latest activity

I would be happy to look at for you. If I can't fix it you don't get charged. PM me if interested.

Does that apply to the folks that relied on them for feeding themselves and families and defense as well?

I just finished working on a Pietta Paterson. Corrected the short arbor, made a music wire spring for that goofy folding trigger, tuned...

That full cock notch has about twice as much material as it needs. If you fool with it go slow and don't change the angle of the trigger...

The thing that takes the frustration out of cap jams is an action shield and cap post. The Slix shot type nipples in my experience tend...

T7 likes a small amount of compression. If you try to compress it hard the pressure get erratic. This from numerous members on another...

I shoot mine with 615 diameter balls. its been pretty accurate. If one uses a groove diameter ball accuracy goes away on account of the...

I use the hi temp grease on account of the spring and summer temperature here. Anything less than the hi temp stuff gets runny and oozes...

Yes it can become a problem. Frame stretch and loosening of the arbor are both very possible. If the wedge starts getting loose its a...

If it pulls caps off that fall into the innards it could stand a cap post and action shield.

Agreed that rifles have their place. My thoughts are use the pistol to it's full capability. Lots of folks have the opinion that a...

On the other side of the coin some Pietta revolvers have an arbor that's a bit long. I would rather deal with one that is long rather...

Hi Temp bearing grease. Both on the arbor and in the frame.

Its 300 feet not a half mile. The handgun ain't the problem in most cases.

Never said I was. And opinions are many and cheap.