desi23's latest activity

Finally got some more time for the Lil Sea Service 😎 I will admit I’ve struggled alot with the trigger on this…..lightened up the sear...

So been playing around with finishes….think I’ve got a good idea as too the direction I’m going for that ! But after slimming the...

So in between waiting for each coat of oil to dry….🙄🤣 Might as well Spend some time on some little extras ! The upper jaw on the cock...

Okay thats it…..I’m gonna say this is the final shaping/slimming done ! Took the grip down abit more behind the panels, flattened down...

Yep she’s dead nuts straight…checked with a steel rule…my vintage iPhone takes garbage pics 😜 That does look really good ! Hard to say...

Yep you got an eye !!! 👍 Marked where the barrel rested along the top edge…..definitely was not exposed to halfway at the breech end...

Worth mentioning too…. Added bonus of adding in the proper entry pipe…the ram rod is way tighter to the muzzle 👌 Originally it hung...

No end to the wood slimming 🤪🤣

Finally got the entry pipe inletted ! Went pretty good….but I will say it’s easier to install one from scratch then to try and...

While playing with the entry pipe I wanted to play with finishes to try and darken up the wood and even out the tones….it had an almost...

So finally got some home time away from work….🙄 Had to tidy up the new pipe guide before I could begin to inlet it … As cast its kinda...

You got that right ! So far I’m only into it for about 350 canadian 😂 Which is like 30 bucks US ! 🤣😜

My virtue left the building about 3 decades back. I was a grunt, not a choirboy. 😂

Buy something cheap, like a Traditions Kentucky kit, that you don't mind destroying in order to build your skill set. ;)

Do you want to work on the gun ? Here is a used Japanese one these bid pretty low, might need a tune. These were sold by navy arms and...