Ditt44's latest activity

Just adjust the height of the legs on the poles. For most squirrel hunting the bi-pod is plenty and you can easily get them set up for...

I recently began shooting the PA Conical in a PA Hunter carbine (1:66). I have found that with equal loads of 70 grains of Swiss 3F...

Adding to the blasphemy of shooting sticks... A few ideas for you all to consider. I picked up a pair of Cascade trekking poles from...

This........ have two of them and should have four or five and no need for other 'gear'. Works great from center fire to ML... Third...

I got in my ground blind at 6:00 am this morning with the intention to set as long as I could stand it. I have been determined to put...

I found a T/C White Mountain fast-twist flintlock barrel and put it on a factory-second stock that I had finished. It is a Hawken...

Very old doe OR a very old antler-less buck? Her raised left leg/hip also makes her look heavier just by the angle and position of the...

Today Mark Wheland finished the 1790-1820 British Sporting Rifle. English walnut stock, Davis lock, 28” swamped Getz .62 caliber rifled...

Hey fellas. The big guy upstairs looked down and smiled upon me this morning. For the last month this ole boy has been hammering down...

This is a Renegade "Hunter". I've had a couple in the past. Single trigger, wide guard such as the PA Hunter. Safe to assume same...

Dremel: IF you use one, lowest speed setting to start. The smaller the piece, the slower the Dremel should turn. A little of the...

This is one instance where the dreaded Dremel tool would be the solution. They make small barrel shaped felt tips that would be ideal...

Hard to tell him apart until he acts up. Four and five at a time there and only 25 yards from my ladder stand. He was at it again last...

Just had to post this for Ed, specifically. This little guy was having a lot of fun all summer and he's still a bit wound up at times...

.50 Round ball. 25 yard shot, in behind the left shoulder breaking a rib. Found under the skin after busting through the right...