gunpa's latest activity

I was wondering if it would be safe to place a felt wad over a Minie" ball or round ball? with the Minies I obviously can't place under...

Those deep scope mounting holes scare, I would put in the screws to fill them in with red Loctite.

The Mag Spark screws out and you screw in a new nipple, you will have to figure out what size threads are in the drum.

Capturing the wedges with a slot and pin as stated above is a good idea and will certainly keep them from being lost but won't make them...

Modified existing wedges. Easy enough to do with a drill and jeweler’s saw.

Consider installing capture pins. The ‘capture’ pin is placed under or behind the slotted inlay, and goes through a slot in the wedge...

Not sure if you have more than one, but if you do, mark each for stock position and up or down side. They don't always interchange. The...

Put a small bend in them to tighten them up. Place on an open vice and hit with a hammer. Don't need much.

Without pictures it is hard to diagnose but I agree with TechMoron, a shorter nipple may do it. I have had good luck with heating and...

Hey Rob what’s the white stuff on the ground any way ,I built a short trade gun with a 26” barrel. I live in shame I mean Canada and...

Have you built before ? Either way ... I can send you this awesome build manual if you want ... via email ...It helped me tremendously ...

They are handy ! !!

Let's see .... I had ..... Hmmmmm ..... I had about $380 in this one ....24 ga. ,26" barrel

I have the time and the tools. I was thinking a barrel of more like 24 inches.

I never thought about applying a bell curve to shooting, but it would work. I use those on occasion in my work. Back to the question of...