longcruise's latest activity

Those deep scope mounting holes scare, I would put in the screws to fill them in with red Loctite.

Thank you! I hav an ace out in town. I remember working at one when I was a young pup, that they always had very unique screws and...

Hmm.. I’ll see what I can come up with. Thank you for that tip. Anthony

This is correct. There's a hex shape in there and the appropriate sized tool should take it right out.

I'd be doing what BoomStick advised - Dremel or cut a slot through the middle so you can use a screwdriver to get some leverage to turn...

For the holes, take one of the screws that you removed and go to your local hardware store. To my knowledge they all have a screw thread...

I bought a TC with a Mag Spark type primer adapter and found it was removable by a hex (Allen) wrench inserted down through the nipple.

Soak it in a penetrating oil (kroil) for a day, grab the mag spark with a needle nose vice grip. You'll probably mess it up gripping it...

The Mag Spark screws out and you screw in a new nipple, you will have to figure out what size threads are in the drum.

So, I got this traditions deer hunter as a project from my father. Dad had an optic and had it drilled and tapped. No big deal. I took...

A blanket gun is different than a canoe gun. A blanket gun is made from a full sized gun hacked off to be a pistol. We only know of one...

Let me clarify what my idea of a canoe gun is, a short-barreled flintlock smooth bore in 20ga capable of shooting shot or round ball. I...

here's a couple of pics of my version of a canoe/ kids gun it started life as a box of mismatched parts that I had laying around the...

Very cool !!

I have never "built" a gun either from scratch or kit, however I have assembled a few from scrounged, bartered, begged and various...