PEARL DRUMS's latest activity

I've made several hundreds osage bows and a hundred more from every suitable wood in NA. Here is what I know for fact. It is...

I've never noticed it to be abrasive. When making bows, I have always easily taken it to a polished surface.

Loved reading your post. Dad and I USED to process hundreds of deer and found all the same things you do/did. We had a girt on the wall...

I finished up building a full stock Hawken last winter and finally got around to shooting it. I built it out of a hodgepodge of parts I...

The barrels were scrubbed, sanded and buffed clean and smooth. Degreased 3x with Dawn dish soap. I used BC Perma blue on them. Five...

Sorry, yes it was a 6mm CVA nipple and I chased the threads with a 1/4-28 and installed a TC nipple.

Took the 10g out again, still fouled! Three shots for three on the wing after three weeks fouled. I left the hens be.

Thank you. I ran a 1/4-28 tap into a 3 mm thread. It worked great and the 1/4-28 nipple threaded down tight and straight. The extra...

The targets are already recycled. Here are the barrels after I refinished them last Saturday. I refinished the wood months ago. I put...

here is some Kibler SMR parts i cleaned up and colored today. i completely dissembled the lock and trigger for the process. they are not...

Would a wire wheel on a drill press be a good start? I use them to polish barrels up before bluing. This isn't the same, of course, but...

I am new to throwing shot from a muzzle loader. So I naturally leaned on the Skychief load. It seems to work okay and I hunted it last...

So today I proved it to myself. Great sit. About 8:30 a few deer started working through the woods toward my ambush on a steep hill...

I think it's the packer who caused the problem. In my experience, USPS has never shown interest in what is in the package. I don't...

The 385 Great Plains out of a .50 TC are crazy powerful. There is some kick back. But, I like recoil. It’s my #3 rifle, so chances of it...