ZUG's latest activity

Yes - but that spring is open too much and needs the upper leave lowered a bit so to do that you will need to heat up the bend and close...

It is 11:12 PCT and I got in and all seems to be OK---

Neat stuff. My brother gave me an old DGW kit that test powder from many years back. I have yet to put it together and I forgot where I...

OK - thanks for the info Rich.

Is the front sight in the middle of the barrel or is it leaning to the side? Does it look bent? Is the hammer notch in the center of the...

It's your spring and you should do as you like with it. If you want a back-up spring then do modify that replacement spring to fit. You...

I have been trying to access the ALR site since this morning about 7:00 am and it says access not available - try again later. It is now...

??? - not sure what you are telling us - You said "I DO NOT want to hear a loud CLICK! " - and - "this method gives me a consistent POI...

I also am having trouble connecting now. I get a message "can not connect to server - try again later".

Buy a ladle and leave it plugged.

I find the access a bit slower than a few weeks ago but I do hook up with the site.

I agree with J.D. on the part had a casting flaw not a heat treat issue. If Pedersoli frizzens had a heat treat issue then you would be...

If you are only air drying the wood it is recommended to figure on drying it one year for every inch. Also figure on losing about 1/8"...

First measure the bore. You just might have to get a custom cutter/punch made. Start by looking for hole saw size that is about 0.010"...

If the nipple is not removed and cleaned during your cleaning process the nipple will become an interaural part of the gun and you will...