Uberti Paterson

user 922 · May 8, 2023

After several months of carefully following online auctions I was able to purchase a NIB Uberti Paterson at a reasonable (for what Pattersons are selling for) cost. I wanted the Uberti because it's the most accurate copy of the original Colt. I wanted the early model without the loading lever - I like the aesthetics of the original design - and I wanted new condition. Pretty tall order but there were three this year so far for sale. The first two sold for very high amounts but I was able to win this one at a much more reasonabe price. I guess I just was in the right auction. I don't intend to fire it since (with apologies to Pawn Stars) shooting it would likely decrease the value.

Now I need to find the correct Uberti loading tool.

B P Arn · May 13, 2023

Coolest looking gun of all time! I have the Pietta version, in far from pristine condition! I have shot mine quite a bit.

user 922 · May 13, 2023

B P Arn said:
Coolest looking gun of all time! I have the Pietta version, in far from pristine condition! I have shot mine quite a bit.
View attachment 221346 View attachment 221347 View attachment 221348

That has some well-earned patina!

Griff093 · May 13, 2023

B P Arn, Who made the holster?

Dusty_Traveler · May 13, 2023

@B P Arn

Now that is one slick rig. A+!

B P Arn · May 13, 2023

Griff093 said:
B P Arn, Who made the holster?

I made the holster myself, then slightly aged it to match the gun.

DOUBLEDEUCE 1 · May 13, 2023

There is just something cool about the Paterson revolvers.

B P Arn · May 13, 2023

DOUBLEDEUCE 1 said:
There is just something cool about the Paterson revolvers.

I prefer the early version without the loading lever. Of course, that means I have to load off the gun. It is slow, but very enjoyable for me.

user 922 · May 13, 2023

What an interesting loading tool. I think that it would be necessary if one wanted to enjoy shooting the Paterson. Every Youtube video I've seen shows someone struggling to use the original tool. I think it would, after a time, damage the slot in the cylinder pin.

One advantage of taking the barrel off is the ability to wipe the parts between firings & keep the rotating parts clean.

B P Arn · May 14, 2023

The original loading tool did not work well, and the repros were even worse, according to what I have heard.

I did own this repro powder dispenser but sold it. It looked kind of cool but was more bother than it was worth.

Griff093 · May 14, 2023

Here is a stand a fellow cowboy action shooter made... and although it's sized to fit the 1851, it works for the Paterson as well. I can then use the Paterson loading tool to good effect. The two parts are not permanently attached, so it's easily transported and utilized at the range. Even if the butt doesn't quite fit into the space for the 1851 grip, the gun is fairly steady in the stand. I also cap the gun after I reattach the barrel. Just keep it half cock and using either my Ted Cash snail capper or an inline capper cap thru the hammer slot in the recoil shield. I've also found out that SlixShot nipples "For Most Pietta Cap & Ball Revolvers" sized at M6x.75 thread work on all 3 Pietta copies I have. So if you want a more reliable nipple, you have a choice. (if you have a Pietta copy).

The little blue sticker has an mate on the upright facing it... clearly indicating which way to assemble it so the gun fits in the upright best. Probably the nicest, most useful gift I've received for the shooting hobby! If I were a machinist, I'd make them and give them away, passing it forward, as it were.

Griff093 · May 14, 2023

B P Arn said:
The original loading tool did not work well, and the repros were even worse, according to what I have heard.

I did own this repro powder dispenser but sold it. It looked kind of cool but was more bother than it was worth.

View attachment 221519 View attachment 221520

I remember seeing those in the EMF catalog back in the day and always thought they'd be a neat addition to the Paterson. I guess keeping the 5 spouts aligned with the cylinder would be a hassle?

B P Arn · May 14, 2023

Griff093 said:
I remember seeing those in the EMF catalog back in the day and always thought they'd be a neat addition to the Paterson. I guess keeping the 5 spouts aligned with the cylinder would be a hassle?

Each charge was adjusted individually by trial and error, and the powder dispenser was complicated to re-load. It was much easier to just load the chambers individually.

Wolfman0125 · May 14, 2023

spinner1 said:
After several months of carefully following online auctions I was able to purchase a NIB Uberti Paterson at a reasonable (for what Pattersons are selling for) cost. I wanted the Uberti because it's the most accurate copy of the original Colt. I wanted the early model without the loading lever - I like the aesthetics of the original design - and I wanted new condition. Pretty tall order but there were three this year so far for sale. The first two sold for very high amounts but I was able to win this one at a much more reasonabe price. I guess I just was in the right auction. I don't intend to fire it since (with apologies to Pawn Stars) shooting it would likely decrease the value.

Now I need to find the correct Uberti loading tool.

Dixie gunworks usually has the loading tool. Here is my Paterson.

Wolfman0125 · May 14, 2023

Here is my Paterson.

CaptainVane · May 21, 2023

I have the 1848 Colt .31 without loading lever, Got tired of disassembling every 5 shot. So i went to Lowes and bought a .25 x 3’ wooden dowel rod; cut into 6” lengths. On right side with barrel up, there is enough space to load powder ball wad and tap it all home with dowel and small tap hammer. Works excellent, no more range disassembly until time to swap the fouling.
I bought this Amazon. Holds the pistol while loading. Way less time spent loading.

CaptainVane · May 21, 2023

My 1848 .31 Pocket Pistol based on the Paterson. In ‘49 Colt added the lever, mine are way less common.

kh54 · May 21, 2023

I have only fired my MOFRA Paterson reproduction once. I used the loading tool that came with it and I didn’t find it difficult to use at all. However, I didn’t notice until I was done, but I bent the tool right at the most fragile point. Fortunately it didn’t break and I was able to straighten it out but I wouldn’t use it again. I’ll have to dust off the loading stand next time.

B P Arn · May 21, 2023

Here are pictures of a loading stand I made in about 2012. I padded the bottom with leather to cushion the grip frame, and also to allow a more universal fit for various revolvers.

I can load my Paterson replica with this.

kh54 · May 21, 2023

Here’s a link regarding a beautiful cased original Colt Paterson that sold for big bucks: 1836 Colt Revolver Sells for Record $977,500 Price at Auction « Daily Bulletin. I keep it in my safe at home.

Notice that even though the gun has a loading lever there is still a loading tool in the case. Maybe that’s just for the nipple wrench.

Uberti Paterson

Help Support Muzzleloading Forum:

40 Cal.

Attachments

69 Cal.

40 Cal.

40 Cal

58 Cal.

69 Cal.

69 Cal.

69 Cal.

40 Cal.

69 Cal.

40 Cal

Attachments

40 Cal

69 Cal.

40 Cal

40 Cal

Attachments

Colt ‘51 & Remington ‘58 .36; Colt ‘48 .31

Colt ‘51 & Remington ‘58 .36; Colt ‘48 .31

45 Cal.

69 Cal.

45 Cal.

Attachments

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!