Here are some photos to share my approach to designing and engraving a Powder Horn. Note how the design changes a bit as I move along with the process.
After shaping the horn I did the borders and established where my drawing panels would go.
Then, like a primed canvas I was ready to work.
This is a flat horn so it’s a little easier to draw and scribe on than round horns, for me.
After shaping the horn I did the borders and established where my drawing panels would go.
Then, like a primed canvas I was ready to work.
This is a flat horn so it’s a little easier to draw and scribe on than round horns, for me.
Attachments
-
IMG_1108.jpeg3.2 MB · Views: 10
-
IMG_1111.jpeg2.7 MB · Views: 0
-
IMG_1112.jpeg3 MB · Views: 0
-
IMG_1114.jpeg1.9 MB · Views: 0
-
IMG_1115.jpeg1.8 MB · Views: 0
-
IMG_1116.jpeg2.3 MB · Views: 0
-
IMG_1117.jpeg1.8 MB · Views: 0
-
IMG_1118.jpeg2.6 MB · Views: 0
-
IMG_1121.jpeg2.5 MB · Views: 0
-
IMG_1124.jpeg3.8 MB · Views: 0