Crockett nipple wrench

DylanAdkins1996 · Mar 3, 2024

Hi everyone I just recently purchased a traditions crockett rifle and I noticed the area between the nipple and the space arou.d it is very thin. And my regular nipple wrench won't go on my nipple cause the side wall is too thick. Does anyone know if I have to have a certain wrench to fit the crockett or another way of getting to it easily?

Jim K · Mar 3, 2024

DylanAdkins1996 said:
Hi everyone I just recently purchased a traditions crockett rifle and I noticed the area between the nipple and the space arou.d it is very thin. And my regular nipple wrench won't go on my nipple cause the side wall is too thick. Does anyone know if I have to have a certain wrench to fit the crockett or another way of getting to it easily?

I had a friend with a metal lathe make one for me. I know exactly what you are talking about. There isn’t much room there.

Dusty_Traveler · Mar 3, 2024

@ETipp is the CROCKETT SQUIRREL RIFLE MASTER. He should be able to help you.

planefixer da50 · Mar 3, 2024

take the hammer off to give you room, small cresent wrench on end to get on nipple. might need some kroil penatrate to soak for a while, little heat will let it lossen.clean threads with small wire brush or old tooth brush also clean bolster threads. use some felpro c5a antiseise before installing. good luck.

TDM · Mar 3, 2024

Take a look at the nipple wrenches Track of the Wolf has. You can probably find one that works.

ETipp · Mar 4, 2024

DylanAdkins1996 said:
Hi everyone I just recently purchased a traditions crockett rifle and I noticed the area between the nipple and the space arou.d it is very thin. And my regular nipple wrench won't go on my nipple cause the side wall is too thick. Does anyone know if I have to have a certain wrench to fit the crockett or another way of getting to it easily?

This small ignition wrench works very well when used in conjunction with Track Of The Wolf nipples. Use the 13/64 open end.
TOTW nipples only cost about $6.00 so if you order from them, it would behoove you to order 2 or 3.

The factory nipple is tapered and too small for number 11 percussion caps and needs to be replaced anyway. Caps fall off way too easy.

The 13/64 open end wrench did not work with the factory nipple but works very well with replacement nipples.

I could not find a specific listing for a nipple wrench for the Crockett rifle on TOTW website so I took a chance and ordered one that I thought would work. It didn’t do so and I’m happy with the ignition wrench. I carry two of those small wrenches with me. Even a cheap one will work fine.

LANEY REECE · Mar 7, 2024

I got a long #10 pistol wrench, and hand ground it to fit.

Crockett nipple wrench

Help Support Muzzleloading Forum:

DylanAdkins1996

32 Cal

Jim K

50 Cal.

Dusty_Traveler

54 Cal.

planefixer da50

32 Cal.

TDM

Cannon

ETipp

70 Cal.

Attachments

LANEY REECE

50 Cal.

Similar threads

Latest posts

Crockett nipple wrench

Help Support Muzzleloading Forum:

32 Cal

50 Cal.

54 Cal.

32 Cal.

Cannon

70 Cal.

Attachments

50 Cal.

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!