• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Using .390 RB in my ASP new model navy "1858 remington navy"

L & R
the hawken shop
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Blackpowderwarrior

Blackpowderwarrior

45 Cal.
Joined
Oct 28, 2020
Messages
755
Reaction score
549
Location
Valdese, NC
I have a fondness for santa barbara 1858 remingtons. I have 2 unfired though they will be.
My love for them made me want a smaller frame .36 remmy and from my research the closest I could find in size is a old ASP.
I managed to score a new Lyman unfired made by ASP remmy in .36.
It looks more like a beals and is much smaller then my .36 pietta.
Oddly enough a .375 ball and conical drop to the bottom of the chamber. A colt conical fits and stops at the driving band.
A .380 ball I can push half the ball in with thumb pressure.
I just ordered a .390 round ball mold from eBay to ensure a tight fitting ball.
Chamber to bore alignment is perfect on this gun as well.
Its literally a masterpiece made far better then my uberti or pietta.
Does anyone else shoot .390 ball in your .36?
 
Mine is Uberti. I use .375. Tried a .380 and it takes some serious pounding/leverage to seat it.
I know a 390 wouldn’t work in mine.
 
Measure the diameter of all of the cylinder mouths to determine the diameter of the soft lead round ball that you need, Measure the diameter at the mouth and about half a ball diameter in the cylinder. Once again I get to emphasize that digital Vernier calipers are necessary tool for this hobby.

Measure the groove-to-groove diameter of the barrel as well.

Based on the loose fit of the 0.380 in @Blackpowderwarrior's revolver, a 0.390 or 0.385 caliber soft lead ball may be required.
 
Last edited:
Grenadier1758 said:
Measure the diameter of all of the cylinder mouths to determine the diameter of the soft lead round ball that you need, Measure the diameter at the mouth and about half a ball diameter in the cylinder. Once again I get to emphasize that digital Vernier calipers are necessary tool for this hobby.

Measure the groove-to-groove diameter of the barrel as well.

Based on the loose fit of the 0.380 in @Blackpowderwarrior's revolver, a 0.390 or 0.385 caliber soft lead ball may be required.
Click to expand...

Grenadier1758 said:
Measure the diameter of all of the cylinder mouths to determine the diameter of the soft lead round ball that you need, Measure the diameter at the mouth and about half a ball diameter in the cylinder. Once again I get to emphasize that digital Vernier calipers are necessary tool for this hobby.

Measure the groove-to-groove diameter of the barrel as well.

Based on the loose fit of the 0.380 in @Blackpowderwarrior's revolver, a 0.390 or 0.385 caliber soft lead ball may be required.
Click to expand...
I won anew old stock Lee .390 rb mold so when she gets here I'll cast a few up
 
I shoot a .40cal flintlock so I have plenty of .390 round balls. I tried them in my Uberti 1851 Navy but they required too much force to load so I will stick with .375’s.
 

Similar threads

B
1864-made Remington 1858 New Army- will an Uberti Cylinder work with it?
Replies
3
Views
403
Relic shooter
Relic shooter
Jappo
  • Locked
SOLD EIE PR 1858 Remington Navy Brass Frame
Replies
4
Views
563
Jappo
Jappo
Jappo
  • Locked
SOLD Pietta 1858 Navy Remington
Replies
10
Views
696
Jappo
Jappo
V
  • Locked
SOLD 1858 Remington .36 cal. 6.5 barrel Uberti / Navy Arms. SlixShot. $300 shipped Reduced
Replies
7
Views
888
Vic
V
Idahomie
  • Locked
CLOSED Navy Arms 1858, .36 Cal
Replies
9
Views
650
Idahomie
Idahomie

Latest posts

Back
Top