tnlonghunter
40 Cal.
I just got back a couple hours ago from the Yorktown Battlefield and Museum. I found this in their display. It's not a great pic, but it was very cool to see as "up close" as a display case will allow.
Pattern 1776 Rifle
- Thread starter Mas Casa
- Start date
Help Support Muzzleloading Forum:
Dave,
You are absolutely correct. I'm interested in the Huhnstock version of the P76 rifle.
That's cool! From what I've gathered from period sources, up to 5 rifles were issued to the light infantry companies of most regiments. For instance, the 40th Foot's light company were issued two. These light company riflemen appear to have been assembled into a provisional rifle platoon or company under the 1st Battalion of Light Infantry which was present at Yorktown.
The Huhnstock P76 rifles were produced before the Birmingham rifles (like the one above) were. The Huhnstock rifles likely went to troops in Burgoyne's Northern Army and the 16th Light Dragoons.
- Joined
- Nov 1, 2018
- Messages
- 3,886
- Reaction score
- 2,915
Regarding the 1776 rifle pictured in the thread. I believe this is one of the 1776 rifles made by Ernie Cowan. Ernie made around a dozen of them, his 1776 rifles were done very well and very accurately detailed.
The current 1776 TRS rifle kit doesn’t use the same barrel, they use Rice and Colerain which will only rifle up to 6 or 7 grooves.
Hoyt has the 1776 barrel pattern that Cowan used.
I think Ernie also cut his own stock the rifle shoppe’s 1776 stock I believe is not the same as Ernies, not sure of the details as to how it’s different.
and used the lock and hardware castings by either the Rifle Shoppe or Butch Scholer. Dave_Person would likely know more specific details.
Last edited:
- Joined
- Feb 28, 2019
- Messages
- 3,552
- Reaction score
- 4,528
Originals in all but one Case that being the ex Whitacker unused rifle Now at Leeds RA example. are scarcer than hens teeth . Before I met Bob Cheel & had info from Kit Ravenshear of the 4 or 5 examples no others at that time being known there where just 800 'got up 'between the four contractors viz Grice. Barker ,Willets& one other Galton & Son (just looked it up in Blackmore British Military fire arms) .200 each then the Hunstock 200 fairly different make the thousand all being paid for and not the number He then listed seems a lot but surviving ratios of any arm are seldom found surviving be they much greater numbers. Ref page 82 & Page 28 Bailies British Military rifles . My register records. Completed manufacture of 62 cal flint carbine '..Tower rifle' number a 67 the 85 Date & exported 28 6 85 with a note' first replica of one '& 'NY state customer' . What Kit OR De Witt did re TRS I know not but it fits the only comment I learned was it was called ' Fair to rough ' The one that is that went to the National Army Museum as I knew their Armorer .( We where old Rendesvous mates ) Dose all this make me Queen of the May ?. Nope, but it is a source of some pride for me .Stuart Museum & A Mr Bicknel had rifles of this pattern Kit knew them as he worked for Stewart .
Regards Rudyard
Last edited:
- Joined
- Feb 28, 2019
- Messages
- 3,552
- Reaction score
- 4,528
Mr Cowen had Furguson's made he never mentioned the 1776s rifles but I did supply items to him & out of the blue he brought a rifle to my wedding Reception Elks Lodge in Ticonderoga ( The Wedding was up of Mt Defiance we did F & I )Not quite a shotgun wedding but novel!. I wore my feilimore a 12" Dirk & a Snaphance pistol it was the F&I Grand Encampment 1999 seemed a stylish plan .
Regards Rudyard
- Joined
- Feb 28, 2019
- Messages
- 3,552
- Reaction score
- 4,528
The order of 1.012 German Rifles bought by & paid for By Ordnance circa 1799 to arm Prince Eugenes in exile regiment Look so very like the West Point Pistor that the same makers kept faithfully to the supposed Revolt war West Point rifle . I bought one years ago didn't know what it was (No one else did either !)Even DeWitt & Herman Benninghoff knew not what it was . But De Witts later research is mentioned in his ' Rifles' book .showing three but dosn't mention the numbered muzzles to match their B nets so my rifle .Bearing number 147 found me when opportune to arrange & examine the few housed in the Leeds RA . And I noted all their numbers .Viz 147, (mine ) 276 , 329 ,708, 874, & 877 De Witt ascribes to Hess Cassel as the source . Thusly in my mind confirming they where most likely those of Prince Eugine's Regiment . Effectively a' Pre Baker' Point being there was little difference in the West Point T, W , Pistor , it bore no proof mark or name of maker but tiny clue is the feather spring has the same style a the Museums ' Pistor ' . The firm was based in Smalkalden Suhl Region but its suggested the Prince Eugine's where produced closer to the UK (Not sure where Hess Cassel is ) .If the same styles seem to change so little its hard to question dates. Even George Shumway said of mine "Its a Jager" and speculated no further .Ide loaned it to H Benninghoff at De Witts insistence he was mostly a Revolt war buff .I finally recovered it & brought it home . .But despite contary views. There where the F&I period indent for "16 Rifles their B 'nets & Moulds" Dated 1758 of which I wondered if my rifle was of that date a possibility we had persued since B' nets where not common with the German Troops dureing the later revolt war Hence naturally these Prince Eugine rifles seemed a possibility . How many & how well spread ? .That I cant but guess If rifles seem more than a possibility . Point being there where SOME rifles midst British troops earlier than some think & state What they looked like ? my guess is probably similar to the Prince Eugenes more or less So Mr Shumway's statement implies the pattern changed but little . Well that's me' Rifled out' for one day .
Regards Rudyard
- Joined
- Sep 16, 2020
- Messages
- 6
- Reaction score
- 8
The Rifle Shoppe has the parts to build one. At least they did the last time I checked. British Military Flintlock Rifles 1740-1840 by De Witt Bailey is a great resource for these rifles. I have a copy that I will sell to you if interested.
- Joined
- Feb 28, 2019
- Messages
- 3,552
- Reaction score
- 4,528
I have my own copy but agree an excellent work I made him a Wilson US style rifle once' Coals to Newcastle !'
Regards Rudyard
Were these to be enfired with ball or a cylindro-conoidal?
- Joined
- Feb 28, 2019
- Messages
- 3,552
- Reaction score
- 4,528
At that date I doubt any govt rifle was intended for any sort of conical. any where , But what some inventor was toying with is an unknown & an unlikely . But one should ever be cautious of saying ' never was 'as some example might pop up to bite you .
Rudyard
- Joined
- Nov 1, 2018
- Messages
- 3,886
- Reaction score
- 2,915
Interesting.
What patching would have been used, if any? Would a mallet have been issued? What about paper cartridges?
- Joined
- Jun 17, 2019
- Messages
- 8,399
- Reaction score
- 9,816
I have one put together from parts about 1980 from the Rifle Shoppe. My retired enactor pal sold it to me recently; was assembled by a gunsmith in PA. Haven't shot it yet, but it's sweet to heft. Can't/don't post because I frankly don't have or know how to do it, (camera) and use the library computer! Would have to attend a "senior" class to even learn the basics. The photos posted here are real fine!
- Joined
- Feb 28, 2019
- Messages
- 3,552
- Reaction score
- 4,528
Interesting Kit Ravenshear lived in PA if the year would be more post 1985 or so. Just looked it up ,my the very first Tower Rifle" was made & sold in1985 it would show Birmingham Proof marks for that year but NB my rifle had the common rod swivels Not the TRS correct one & had a Round face lock (A 'North Star' for want of better at the time) If your rifle has none Or spurious ones .Then its likley some other maker . Regards Rudyard
It went for a whopping 33K. Unbelievable.
I would contact the museum at Colonial Williamsburg and ask who made the P1776 that they have on display. Probably English made but you never know.
- Joined
- Nov 1, 2018
- Messages
- 3,886
- Reaction score
- 2,915
If it’s the reproduction on display that was Ernie Cowan’s pattern.
- Joined
- Feb 28, 2019
- Messages
- 3,552
- Reaction score
- 4,528
Ide like to think it was his pattern, But it wouldnt surprise me if it was from the Herman Benninghoff collection he got one from Kit Ravenshear & might have got the original one that Bob Cheel had I think Benninghoff got that one , there all dead . If I made the first replica but it wouldn't be that one. Ask them they might tell you
Ide make you one for half the price !. Be just as good & warranted not to burst more than once " Hurry while Stockers last !" I am 79 till the end of the mounth Much beyound I cant predict but the auctioneers photos are very good .
Regards Rudyard
Pretty!
Similar threads
