• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Track of the Wolf

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mike in FL

50 Cal.
Joined
Jul 2, 2022
Messages
1,322
Reaction score
1,825
Location
Ormond Beach FL
I tried twice before to post this but never saw it get through. Problem may have been on my end, don't know. Anyway: has anyone bought flints from Track lately? I ordered a dozen Black English flints for my Colonial. Each one has a very high hump, so high that the jaws screw had to be backed out to where there was only a little thread remaining to use. I'm in a wheel chair this week and can't get to my stuff, so I have no photo. Didn't call Track 'cause I don't suppose they are actually defective and will function as well as thin flints. They are taller than any store-bought flints I've ever seen. As my son would say, "'Sup wid 'at?"
 
When I order flints from TOW I always request "flat" flints. They are hand picked then. With the "humpy" flints that i bought somewhere, (can't remember where} I put in my vise and grind them down with a diamond wheel with a Dremel tool.
That is good to know and the answer I need. I didn't keep the receipt nor the packaging, but I will ask for flat next time.
 
I do the same. Put "No humps please" in the comment box of the order. Ordered several dozen over the years from Track. All have been good. Now I just buy them at Nationals.
 
I ordered some a few months ago and they were also thick. I have a diamond disc for my grinder and thinned them with it. I just clamped the grinder in my vise and held the flint in my fingers. Just have to keep dipping the flint in water to cool it. Worked like a charm for me but i know some don't have those tools.
 
I ordered some a few months ago and they were also thick. I have a diamond disc for my grinder and thinned them with it. I just clamped the grinder in my vise and held the flint in my fingers. Just have to keep dipping the flint in water to cool it. Worked like a charm for me but i know some don't have those tools.
I've done this. But i've used pliers and wear a mask. I like my fingers and my lungs!!!
 
I tried twice before to post this but never saw it get through. Problem may have been on my end, don't know. Anyway: has anyone bought flints from Track lately? I ordered a dozen Black English flints for my Colonial. Each one has a very high hump, so high that the jaws screw had to be backed out to where there was only a little thread remaining to use. I'm in a wheel chair this week and can't get to my stuff, so I have no photo. Didn't call Track 'cause I don't suppose they are actually defective and will function as well as thin flints. They are taller than any store-bought flints I've ever seen. As my son would say, "'Sup wid 'at?"
Diamond file will dress the flints
 

Latest posts

Back
Top