Tutorial: Snapping Matchlock Mechanism

L & R
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
B

benvenuto

50 Cal.
Joined
Oct 17, 2004
Messages
1,030
Reaction score
4
Turn back now if you are on a slow connection - big images ahead!
-------------------

27930802_377980f01f_o.jpg
Matchlocks in the armoury of emperor Maximilian I. Either Codex Icon or Codex Monacensis 222 depending on who you believe, painted by Nicolaus Glockenthon in 1505. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964

27930803_9c776d3774_o.jpg

Detail showing lock. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964

27930804_524d87af05_o.jpg

Detail showing four guns, three of which have a similar type of lock. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964

27930805_467a9c1e0b_o.jpg

Detail of top two locks. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964
to be continued...
 
27930807_643d29676b_o.jpg

Snapping matchlock, Basle Historical Museum, Switzerland. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964

27930806_1598bf592c_o.jpg

Detail of lock and butt. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964

27931270_ce5c296b82_o.jpg

Another similar example, Basle Historical Museum, Switzerland. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964

27931269_715e3e0771_o.jpg

Detail of lock and butt. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964
To be continued...
Questions at the end please!
 
27931271_582a1320a7_o.jpg

"Standard" European matchlock for comparison. The match holder has a slotted tumbler into which is fitted the end of the sear-lever. this is operated by either a long extension or a separate trigger SOURCE: Howard L Blackmore, Guns and Rifles of the World, Chancellor press, 1965

27931272_2f220766a7_o.jpg

Indian matchlock for comparison. The match holder is connected to the sear-lever by a separate link. Both work in a vertical slot cut in the stock, and are pivoted in tranverse pins SOURCE: Howard L Blackmore, Guns and Rifles of the World, Chancellor press, 1965

27931273_5bbccf0eac_o.jpg

27931274_f237d09667_o.jpg

Snapping Matchlock, 16th century, German, in the Bern Historical Museum. Interior mainspring A works on tumbler. A spring, B lying inside the lock has stud C in the middle which protrudes through the lockplate and acts as a sear by holding down the tail of the match holder in the cocked position. This is released by pressure on the button trigger D which is fastened through the lock plate to the end of the sear spring. SOURCE: Howard L Blackmore, Guns and Rifles of the World, Chancellor press, 1965

To be continued...
Questions at the end please!
 
27934614_21fd6c6501_o.jpg

27934615_64a5ada866_o.jpg

From a German wall gun, dated 1562 on the barrel, Tower of London. The mainspring A acts on the tail of the match holder on the outside of the lockplate. The sear C consists of a horizontally acting lever pivoted in the middle. On one end is the stud which passes through the lockplate and acts in the same way as the previous lock. The other end is bent at right angles so that the sear can be withdrawn (by a separate trigger) against the pressure of spring B. SOURCE: Howard L Blackmore, Guns and Rifles of the World, Chancellor press, 1965

27934616_250475e38e_o.jpg

27934617_1852d153cb_o.jpg

From a late 16th century German rifle, Tower of London.
This type of lock, which has a set trigger is found only on a special group of european matchlocks (see plates 59 and 60). The cock is controlled by the mainspring A, which works on the tumbler. These two parts, and the trigger D are attached to the inside of the lockplate. Along the bottom of the lockplate, and at right angles to it is the base plate to which the remaining parts are fitted. These are the sear-lever C; an intermediate lever E; and a spring B, which controls both. One end of the sear catches the tumbler, and the other is pressed towards the lockplate by the intermediate lever. In order to cock the lock, the intermediate lever is pulled away from the sear by a piece of string, F (which is threaded through the lockplate) until its pointed end is held by the rotating trigger stem. The match holder can then be pulled back until the sear catches in the tumbler. When the trigger is pulled, the intermediate lever is released. This gives the sear a smart blow causing it to release the tumbler and the match holder falls into the pan.
SOURCE: Howard L Blackmore, Guns and Rifles of the World, Chancellor press, 1965

To be continued...
Questions and comments at the end please!
 
27934618_5a7947b2fa_o.jpg

27934619_cd7272c10f_o.jpg

Japanese snapping matchlock, from an 18th century carbine, Tower of London. Made entirely of brass and constructed without any screws. Both the cock and the sear are motivated by coiled springs. The mainspring, A is coiled around the tumbler which has a notch into which the sear C is pulled by another coiled spring B when in the cocked position. To allow for any slackening in this brass spring, additional fastening holes are provided on the sear in order to stretch the spring and increase it's tension. SOURCE: Howard L Blackmore, Guns and Rifles of the World, Chancellor press, 1965


27935017_942dedd863_o.jpg

27935018_3e723ce98e_o.jpg

Javanese snapping matchlock, no further details known.
The brass mainspring A is fastened to the outside of the lockplate where it presses upwards on the tail of the cock. The sear, C is a simple piece of iron, one end bent to protrude throughthe lockplate and catch on an indentation in the tail of the cock, and the other bent round so that the separate trigger can act on it. A flat leaf spring B bears on the end of the sear with a forked hook.
SOURCE: Howard L Blackmore, Guns and Rifles of the World, Chancellor press, 1965
 
27936453_dd9d96f304_o.jpg

Early matchlock. SOURCE: Heinrich Muller, Guns Pistols Revolvers: Hand Firearms from the 14th to the 19th Centuries, St Martin's Press, 1980
27936454_e59d73c73c_o.jpg

Historical Museum, Basle. SOURCE: Paul Martin, Armour and Weapons, London 1968

OK, i'm done... back to my sick-bed...

or rather CLASS DISMISSED! :)
 
Here the mechanism with hair trigger used on target guns until the middle of the 17th century

blunte.JPG
 
I whish I had noted the title on the copy, probably not english. Book from library, I kept the titles but did not track which copy belongs to which book.
 
27930807_643d29676b_o.jpg

Snapping matchlock, Basle Historical Museum, Switzerland. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964

27930806_1598bf592c_o.jpg

Detail of lock and butt. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964

27931270_ce5c296b82_o.jpg

Another similar example, Basle Historical Museum, Switzerland. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964

27931269_715e3e0771_o.jpg

Detail of lock and butt. SOURCE: Harold L Peterson, Encyclopedia of Firearms, The Connoisseur,1964
To be continued...
Questions at the end please!
Click to expand...

This is the basic lock pattern that I copied for my snapping matchlock. With a piece of hacksaw blade for a spring to hold the sear out, a copper rivet for the "trigger", and a piece of a Mauser magazine spring for the mainspring and a lot of hacksaw and file work later, "Viola!" a matchlock! ::

One thing about a snapping matchlock, they're FAST in the ignition! :shocking:

Thanks for posting all of these, Benvenuto! :hatsoff:

Cheers,

Gordon
 
Yes, and so do two of the locks I posted above if you look carefully...
The mary rose guns DO have a trigger and trigger guard tho' :blah:
 
Gordon,
get some pics for us all!
I've been working on the top one for a while now, but all I have so far are stock patterns and a cardboard mockup for the lock. I have been stockpiling industial metal bandsaw blade for springs though :)
Still puzzling over that barrel. I can buy carbon steel "hollow bar" (thats 32mm bar with a 16mm hole in it, or 25mm bar with a 5mm hole in it) in 20MV6 grade. What i need is access to a milling machine, or some king of grinding jig I can use at home to shape the flats and correct taper on the damn thing. Anything except having to file it! :cry:
 
Benvenuto;

I've asked the present owner for some pics, we'll see what transpires! But Jeeminy Christmas! Mill stuff out? I guess I'm still in the hacksaw-and-a-*******-mill-file stage, LOL! I think the only power tool I used was a drill. Of course, it's not like these things are hard to make...

I'll post pics if and when I get them!

Cheers,

Gordon
 
Well, I do have occasional access to a #300 power hammer, I could make a mandrell and forge the outside of the barrel to size and shape. Problem is the furnaces there are only 600mm (24") deep, and I need at least 900mm (36")for barrel work. I'd hate to heat one end at a time and not have the flats of the octagon meet properly in the middle!

I've read descriptions of the grinding jigs used by the old time pennsylvania barrel makers, its just coming up with somthing similar that doesn't need a water mill that is exercising my brain cells :)
 
Wow! 2005 seem like a hot minute ago now! Was going to start cleaning up the lock castings from TRS’s snapping matchlock. I don’t actually know how the mechanism works in this one so was searching about the group and found this thread. Ordering a copy of Blackmore’s book since it’s relatively inexpensive used.
 
Philip Chua said:
Wow! 2005 seem like a hot minute ago now! Was going to start cleaning up the lock castings from TRS’s snapping matchlock. I don’t actually know how the mechanism works in this one so was searching about the group and found this thread. Ordering a copy of Blackmore’s book since it’s relatively inexpensive used.
Click to expand...
I’m pretty sure the TRS snapping matchlock is supposed to be a copy of this style of matchlock, famous for being present on the Mary Rose when the ship sank:
https://royalarmouries.org/collection/object/object-31168

This thread has some great pictures of a slightly earlier version, with additional photos of the lock out of the gun, as well as information on the above style:
http://www.vikingsword.com/vb/showthread.php?t=7542
 
Last edited:

Latest posts

Back
Top