• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Classy Barn Rifle (Reduced Again)

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 5, 2021
Messages
1,315
Reaction score
1,709
Location
SE PA
Northampton style barn rifle, or sometimes called a Lehigh Schimmel. Gun was made at the historic Henry Family Gun Shop at Jacobsburg PA by the three master gunsmiths (Jim Correl, Rich Hjusa and Carl Landis) that taught classes in the shop. The gun is expertly assembled, with minimal hardware (just a single ramrod thimble and the trigger guard) that gives a simple elegance to a flintlock in it's essential form -a lock, stock and barrel.

A note of some interest, the award at the July Gunmaker's Faire is named in honor of Hjusa. One of this year's judges was Jim Correl.

The heart of the gun is a 38-inch 50 caliber barrel, 7/8 straight with a 1-60 or so twist. Bore is bright, smooth and shoots very well. Metal has been finished and rubbed back to give it an authentic aged look. Maple stock is finished in a traditional red-brown. Despite having no butt or toe plate, the butt is smooth and the stock overall has just a couple small handling marks.

A handmade trigger trips a tuned and timed lock. I believe the lock is a small Siler or Chambers. The fly has been deliberately removed from the tumbler.

Gun is 54 inches overall and weighs 7 pounds 1 ounce. LOP is 13 1/2. Ramrod is antler tipped at one end, other end is tapered and plain -this is a simple rifle by design.

Asking $2000 (now) $1700 shipped in the US. PM for details.
 

Attachments

  • PXL_20240607_224928024.jpg
    PXL_20240607_224928024.jpg
    551.4 KB
  • PXL_20240607_224950639.jpg
    PXL_20240607_224950639.jpg
    1.4 MB
  • PXL_20240607_225223349.jpg
    PXL_20240607_225223349.jpg
    3.5 MB
  • PXL_20240607_225234048.jpg
    PXL_20240607_225234048.jpg
    2.5 MB
  • PXL_20240607_225259332.jpg
    PXL_20240607_225259332.jpg
    1.8 MB
  • PXL_20240607_225304446.jpg
    PXL_20240607_225304446.jpg
    2.2 MB
  • PXL_20240607_225315752.jpg
    PXL_20240607_225315752.jpg
    2.7 MB
  • PXL_20240607_225356596.jpg
    PXL_20240607_225356596.jpg
    2.5 MB
  • PXL_20240607_225442422.jpg
    PXL_20240607_225442422.jpg
    1.9 MB
  • PXL_20240607_225452450.jpg
    PXL_20240607_225452450.jpg
    2.2 MB
Last edited:
Bore and lock photos. Also a 5-shot group from the last time I had the gun out -50 yards rested at the bench.
 

Attachments

  • PXL_20240322_214959034.jpg
    PXL_20240322_214959034.jpg
    2.3 MB
  • PXL_20240607_223803984.jpg
    PXL_20240607_223803984.jpg
    1.3 MB
  • PXL_20240607_225716812.jpg
    PXL_20240607_225716812.jpg
    1.4 MB
  • PXL_20240607_230158451.jpg
    PXL_20240607_230158451.jpg
    2.3 MB
  • PXL_20240607_231622142.jpg
    PXL_20240607_231622142.jpg
    2.6 MB
  • PXL_20240607_231736791.jpg
    PXL_20240607_231736791.jpg
    2.2 MB
Why has the fly been removed, and also whens abouts would you say this piece was built? Thanks!
This gun was the 2011 Jacobsburg Society raffle rifle. A fly is not required on a gun with a single trigger. I suppose as the lock was being tuned it was deleted to keep it all as a Schimmel would have been -despite using a production lock.
 
What was the load that produced the marvelous group?
My notes for the day say 55gr of 3F with .490 RB and .015 Muzzle Loader Originals cotton lubed patch.

The gun drew a lot of attention that day and I had 3 guys each try it. One of them had one of the new Garmin chrono gizmos and when he shot that combo it was showing around 1350 fps, if it was reading right and if I remembered the bullet weight right...think I said 175gr.
 
This gun was the 2011 Jacobsburg Society raffle rifle. A fly is not required on a gun with a single trigger. I suppose as the lock was being tuned it was deleted to keep it all as a Schimmel would have been -despite using a production lock.

Single or double trigger, it does not matter, the fly guards the half **** notch while putting on the cap or priming the pan. The fly is to keep the sear from falling into the half **** position as the gun is fired.

I think he lost it while the lock was being tuned.
 
Status
Not open for further replies.
Back
Top