- Joined
- Sep 13, 2020
- Messages
- 815
- Reaction score
- 1,204
If using the mango wood (which looks a lot like walnut to me) , I wonder what regionally appropriate locally grown ML might be appropriate to match it too for the fun of it?
Mango Wood For Pistol, Rifle, or Musket Stocks?
- Thread starter Gorloff
- Start date
Help Support Muzzleloading Forum:
Curious as to how dense and heavy Mango wood is. Some tropical woods can really get up there!
(I was in Palawan, Philippines years ago and carved a paddle for my Banka boat. I think the wood was Ipil-Ipil (?) or Nara.
It was beautiful but I soon realized, to my dismay, that it sank
)
(I was in Palawan, Philippines years ago and carved a paddle for my Banka boat. I think the wood was Ipil-Ipil (?) or Nara.
It was beautiful but I soon realized, to my dismay, that it sank
)
Last edited:
Brokennock
Cannon
I believe that info is in the reply with the wood database screenshots.Curious as to how dense and heavy Mango wood is. Some tropical woods can really get up there!
(I was in Palawan, Philippines years ago and carved a paddle for my Banka boat. I think the wood was Ipil-Ipil (?) or Nara.
It was beautiful but I soon realized, to my dismay, that it sank
So what I would do is remove the bark from the tree pieces, and PAINT the ends of the pieces with oil based paint. I was taught that when self drying harvested wood, that to prevent cracks from forming lengthwise due to drying, one paints the ends of the log(s) with oil based paint, or latex if one cannot obtain oil based paint, and thus the drying is slow and thorough and even, throughout the wood. Normally this drying is done inside a shed.
YES this takes a LOT longer to dry out the wood for stock use, but because you will have shrinkage, you "roll the dice" if you cut some sort of "stock blank" before the wood is dry as it often dries out too small unless done by an expert
ALSO, even if you have smaller pieces that won't work for a rifle or smoothbore stock, consider pistols, knife handle blanks, and even pieces that might be turned for fountain pens (which is a very popular side-line for the guys that do woodworking using a lathe). It'd be really cool (imho) if ten years from now you had a nice shotgun with mango stock, and the metal bits were financed by selling off mango wood knife handle blanks, revolver grip blanks, and fountain pen blanks.
LD
What info would that be?
On wood-database.com.
great looking knives
Brokennock
Cannon
The density/weight
Again refer to wood-database.com
- Joined
- Oct 6, 2020
- Messages
- 1,658
- Reaction score
- 2,727
Where I grew up in South America they did not use the mango wood for anything. It was soft compared to other woods they worked with. So prone to have termites chewing it up! thought mango trees in our area would grow fairly large it would be hard to find a suitable section to do much with.
- Joined
- Oct 6, 2020
- Messages
- 1,658
- Reaction score
- 2,727
Thanks!!
