Does anyone make or have seen or used a larged sized flat powder horn? I know the small priming sizes are popular, but is it even possible to make a larger horn that's also flat and is meant to hold the main charge?
Thanks!!
Thanks!!
Large FLAT Horns?
- Thread starter Smokey Plainsman
- Start date
Help Support Muzzleloading Forum:
- Joined
- Mar 23, 2021
- Messages
- 2,832
- Reaction score
- 6,062
You can flatten almost any horn, thinner is easier as it is easier to heat up.
Put a horn in hot oil and leave it until heated through and becomes easy to shape, in the past they have made countless things from horn this way.
You lose some capacity when the horn gets flattened, but some think they carry easier.
Stophel
75 Cal.
- Joined
- Jul 8, 2005
- Messages
- 5,963
- Reaction score
- 869
German powder horns are universally flat. They're also not all that big. Intended to be carried in the coat pocket, and not intended to carry a huge amount of powder. How much powder is really needed on a normal hunting trip?
I have yet to see any that would be considered "large", though I own one that might hold something like a third of a pound of gunpowder ... maybe.... probably more like a quarter pound....
I did a "normal" sized horn for myself many years ago. I didn't press it really flat, just "flattened" into a sort of oblong octagon shape. Actually, I don't even remember how I managed to get that octagon shape... it was a long time ago!
Flattening a horn reduces the powder capacity A LOT, and unless you're trying to make something to fit into a pocket, it's really kind of a pointless endeavor. A lot of work for no real practical return.
I have yet to see any that would be considered "large", though I own one that might hold something like a third of a pound of gunpowder ... maybe.... probably more like a quarter pound....
I did a "normal" sized horn for myself many years ago. I didn't press it really flat, just "flattened" into a sort of oblong octagon shape. Actually, I don't even remember how I managed to get that octagon shape... it was a long time ago!
Flattening a horn reduces the powder capacity A LOT, and unless you're trying to make something to fit into a pocket, it's really kind of a pointless endeavor. A lot of work for no real practical return.
- Joined
- Sep 19, 2024
- Messages
- 12
- Reaction score
- 24
I bought this horn from a maker named Chris Helsel. It is made from an Aoudads Sheep horn. I added the beads and strap after I received the finished horn. This horn holds about 1,500 grains of powder so it is little small for competition with my .54 but plenty big for hunting. I plan to pair it with my .32 Squirrel gun.
See my reply to your request for a small flat horn.
ADK Bigfoot
ADK Bigfoot
ArmorerRoy
40 Cal
My Large Flat horn
