Fowler kicking my tail

Buff1958 · Oct 15, 2024

I have a 20 gauge Kibler and I can not get it to group at 50 yards.
I had shot it at 25 and the best I could do was about 4" but last weekend we had to shoot the targets at 50 yards and I was all over the paper.

Today I tried.....
60 grains of FF with a .018 patch
70 grains of FF with a .015 patch
70 grains of FF with a .018 patch
80 grains of FF with a .015 patch
80 grains of FF with a .018 patch
all with a .600 ball

I tried 60,70 and 80 with a .015 patch and a .610 ball ( had to start it with a mallet )

I tried 60,70 and 80 with a .015 patch and a .600 ball with a shot gun wad over the powder and the best I was able to do was 8" at 50 yards.

Anyone have a secret load ?

flconch53 · Oct 15, 2024

With a smoothbore no way you should have to load it that tight. Are you shooting off a rest?

2 shots · Oct 15, 2024

Buff1958 said:
I tried 60,70 and 80 with a .015 patch and a .600 ball with a shot gun wad over the powder and the best I was able to do was 8" at 50 yards.

are you using a wad or over powder card?? have you tried a bare ball?

Buff1958 · Oct 15, 2024

Shazam…….
I read an old post from 2008 where someone was using .570 balls in their 20 gauge.
Went out back and loaded 60 grains with a .575 ball and .018 patch.
First one was high so I moved the sight down a tad.
Next 3 were touching

I would have never tried that small a ball if I had not it on here

olskool · Oct 15, 2024

i built a Kibler fowler that i sold. but before i sold it i had to shoot it. i was surprised at the accuracy. i used a .570 ball because that is what i had. i used a .18 ticking and 65gr. of 2f it shot about a 2in group at 50yds. then i found some .600 balls and the groups opened up to 5in. that thing liked the 570 over the 600,,,,,,,,,,,,,,,,,,,

Buff1958 · Oct 15, 2024

olskool said:
i built a Kibler fowler that i sold. but before i sold it i had to shoot it. i was surprised at the accuracy. i used a .570 ball because that is what i had. i used a .18 ticking and 65gr. of 2f it shot about a 2in group at 50yds. then i found some .600 balls and the groups opened up to 5in. that thing liked the 570 over the 600,,,,,,,,,,,,,,,,,,,

who would have thought it…… I wasted a half pound of powder mess with .600 and .610 balls today

Frontier's · Oct 15, 2024

Try 3fg

RiverRat · Oct 15, 2024

.570 rbs should be a dream in loading in a 20 guage. I am still waiting on my kibler 20g to arrive and I will definitely try some .570 rbs.

Rob M. · Oct 15, 2024

Interesting ... If I can keep all my shots on a paper plate , he!! , I'm happy but ....very interesting stuff here .

French Colonial · Oct 16, 2024

I have a 20 gauge Caywood, 60 grains of 2F, 600 ball and a .010 patch shoots very very good.

This could be a bedding issue, make sure the barrel pin holes are elongated and the barrel is well seated at the breech

Banjoman · Oct 16, 2024

Maybe this will help. 25 yards standing. Bottom 6 holes were me trying to figure out the sight picture since this gun has only a coarse front sight. 4 holes in the middle were after I figured it out. .60 caliber Fusil de Chasse, 65 grains Scheutzen 2f, .575 bare round ball and maple leaf wadding over ball since I didn’t have tow with me.

* But after reading this all again, I see you done figured it out. Good shooting! Ain’t these smooth bores fun! *

Loyalist Dave · Oct 16, 2024

Buff1958 said:
Shazam…….
I read an old post from 2008 where someone was using .570 balls in their 20 gauge.
Went out back and loaded 69 grains with a .575 ball and .018 patch.
First one was high so I moved the sight down a tad.
Next 3 were touching

I would have never tried that small a ball if I had not it on here

Absolutely LOVE how you marked the earlier shots. INGENUITY!

LD

dave_person · Oct 16, 2024

Hi,
I shoot 0.595" balls with 0.012-0.015" thick patches in my 20 gauges. A smaller ball like 0.580s or 0.575s will work fine as well usually with thicker patching. Thin patches often burn out with a tight ball and too much powder. I suggest go smaller with the ball, thicker with the patches, and 70-75 grs 2F or 3F should be plenty.

dave

acavdragoon · Oct 16, 2024

.61 bare ball 65 2F Swiss.

Buff1958 · Oct 16, 2024

Loyalist Dave said:
Absolutely LOVE how you marked the earlier shots. INGENUITY!

LD

My grandma always said "poor people have poor ways"

Hatchet-Jack · Oct 16, 2024

My .62/20g Chambers Fowler didn't do well with a .600 RB with wads/cards or patches and 2F. As soon as I switched to .595 patched RB with 80g of 3f I started hitting the 10x consistently at 25 yards, and getting tighter groups at 50. I used it to shoot the Silhouettes match at nationals. It's a lot of un smacking those iron targets over with that big ball!

oreclan · Oct 16, 2024

Buff1958 said:
My grandma always said "poor people have poor ways"

Was that broken bits of your ramrod!?

Fisherking · Oct 17, 2024

65 grains of 3f with a powder card over and under shoots exactly wherever i happen to be aiming. My groups are all my doing, not the load or gun. I tried all sorts of patch and wad combinations and both of my smoothbores shoot that best… or perfectly even. Loading is easy, components could all fit in a back pocket. Maybe its worth a try?

Even my step mom can do it.

waksupi · Oct 17, 2024

I use .595 RB, 60 gr. 3FFF, pillow ticking with moose milk. If I hold well enough it hits where I look. If you can't start a ball with your thumb in a smooth bore, you are loading too tight.

sportster73hp · Oct 17, 2024

This is helpful . I have a Kibler and have been using a tight .600 ball combo. I have .570 and .575 molds to try

Fowler kicking my tail

Help Support Muzzleloading Forum:

40 Cal

Attachments

50 Cal.

69 Cal.

40 Cal

Attachments

32 Cal.

40 Cal

Buckskins & Black Powder

45 Cal.

70 Cal.

62 Cal.

Hillbilly

Cannon

54 Cal.

40 Cal

40 Cal

54 Cal.

45 Cal.

40 Cal

Attachments

Ric Carter

50 Cal.

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!