• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD A 2nd Short Starter and Turn Screw Set

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Dec 9, 2010
Messages
520
Reaction score
876
Location
Western New York
I was able to get the new to me lathe operating so I made up a couple of sets of Short Starter and Turn Screw. This offering is of WALNUT, rod on starter is 3/8” brass. Turn Screw blade is 1095 steel hardened and drawn. Asking, still at $35 shipped to you. PP, MO, CHECK or $$, happily accepted.
Thanks again for looking.
C4C2E68F-72BD-46A8-BC0E-075A0BFEADEA.jpeg
 
Status
Not open for further replies.
Back
Top