• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WITHDRAWN Rear sight for Zoli 1841 "Mississippi" rifle

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
If you are looking for the "Tombstone" type, meaning the simple small metal one, that you drift side to side for windage,,,,,,, They can be made very easy with a piece of "bar stock", or upside down "T" bar.
Just file the piece to make it fit your dovetail, make it 3/8th in tall, and file a "V", or straight notch in it, and you are done. File the notch for what ever powder charge and projectile you are going to use.
Easy peasy.

Dave
 
Hard to tell from photos, but photos of the rear sight on Zoli Mississippi rifles look like they may be the same as what’s on my Pedersoli. Might be able to get one from Pedersoli?
 
Cool. Just giving you an option you may not be aware of. If HC is your goal it will be a long journey with a Zoli.
A Zoli '41 can be put back in original configurations as far as the sights. It wouldn't be a long journey with the Zoli as far as getting it close. I am not new at this and have had years of experience with Civil War reproductions.
 

Latest posts

Back
Top