• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Cochran flintlock parts

shop deals on amazon
the hawken shop
L & R
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
C

Countryboy3006

32 Cal
Joined
Aug 23, 2024
Messages
18
Reaction score
6
Location
Kentucky
I have a rifle that has a Cochran lock on it. I have been getting more into shooting it and there are a few improvements to the rifle I was thinking of making and parts on the lock that could use replacing. Is there anyplace to get parts for these or parts for another lock that would work on it? If no parts can be found is there another lock that I could replace it with if I ever needed to? I’m debating on if I want to spend time on doing improvements on this rifle but don’t want to put a bunch of work into it if I am not going to be able to find parts for the lock.
 
I have a double barrel flintlock shot gun with Cochran locks. They are top of the line back in the day. I'll try and find the spec's on them and I think some parts are still available.
https://www.muzzleloadingforum.com/threads/double-barrel-16-gauge-flintlock-shotgun.95853/
Pictures that are missing are at the end of the thread.
Edit: add contact info.
Jim Alvey of Texas is the owner of the Cochran line of flintlock and percussion gun locks. Jim has complete locks and parts for sale. Replacement parts include any mainspring, frizzens and other individual parts.
You can reach Jim at 806-874-0891 or contact him by email at [email protected]
 
Last edited:
I guess it depends on what is troubling the lock. Cochran locks are well-regarded but long out of production.

Swapping for a new lock, making or finding replacement parts are all possible...but maybe it just needs a tune-up?
 
BoomStick said:
I guess it depends on what is troubling the lock. Cochran locks are well-regarded but long out of production.

Swapping for a new lock, making or finding replacement parts are all possible...but maybe it just needs a tune-up?
Click to expand...
The lock still works OK but the head of the lock anw screw is all buggered up and the frizzen has a small divot wore in it where the flint strikes it. I’m not experienced enough to know if it is really something I need to be worried about but I thought it wouldn’t hurt to replace these if I was able to.
bpd303 said:
I have a double barrel flintlock shot gun with Cochran locks. They are top of the line back in the day. I'll try and find the spec's on them and I think some parts are still available.
https://www.muzzleloadingforum.com/threads/double-barrel-16-gauge-flintlock-shotgun.95853/
Pictures that are missing are at the end of the thread.
Edit: add contact info.
Jim Alvey of Texas is the owner of the Cochran line of flintlock and percussion gun locks. Jim has complete locks and parts for sale. Replacement parts include any mainspring, frizzens and other individual parts.
You can reach Jim at 806-874-0891 or contact him by email at [email protected]
Click to expand...
I sent an email to him but I have seen on other posts where people have said they were unable to get in touch with him.
 
Screw for the top jaw should be easy to replace. The only frizzens I've seen without a couple small divots are guns that never get fired. Even frizzens with a somewhat scratched and rough surface can still spark well. I would assume your lock is fine and unlikely to unexpectedly fail, you can make your other improvements to the gun.
 
BoomStick said:
I guess it depends on what is troubling the lock. Cochran locks are well-regarded but long out of production.

Swapping for a new lock, making or finding replacement parts are all possible...but maybe it just needs a tune-up?
Click to expand...
Great locks. Using mine now for 35 years. The frizzen spring broke so I had to had another one made.
You will gain nothing by swapping out the lock.
 

Similar threads

C
WANTED W L Cochran Lock parts
Replies
0
Views
79
Countryboy3006
C
O
Cabela's 50 cal Hawken Flintlock
Replies
1
Views
340
kyron4
K
E
Homemade Siler replacement lock.
Replies
5
Views
377
EC121
E
?mark
Italian flintlock problems
Replies
17
Views
1K
?mark
?mark
bmumma
Recommended companies to repair Black Powder rifles
Replies
4
Views
288
Mdl94
M

Latest posts

Back
Top