How do you prime?
- Thread starter Oldbear63
- Start date
Help Support Muzzleloading Forum:
Oh, If not under time pressure I do like to use a vent pick to clear a little tunnel in the main charge. I don't know if this is regraded as priming but it is part of my priming retinue. I find when I do this I rarely, if ever, have a mis fire.
- Joined
- Dec 4, 2006
- Messages
- 12
- Reaction score
- 5
Amen.
- Joined
- Dec 25, 2011
- Messages
- 9,485
- Reaction score
- 4,650
I made a dohicky with the spring loaded plunger out of a 50 BMG case and soldered a lanyard into the primer pocket. Not by any stretch of the imagination authentic but sure looks cool and the taper of the case makes it work like a dream !
I prime with Null-B now days and the 50 BMG dohicky meters this prime powder( dust really) very well.
Paul Nelson
Live Free or Die .54 cal
- Joined
- Mar 3, 2021
- Messages
- 88
- Reaction score
- 140
Made this priming horn to go with the powder horn I purchased.
- Joined
- May 6, 2013
- Messages
- 4,347
- Reaction score
- 10,047
Those are neat . Ive never used them much but last December , Ken Netting sent me one real similar to these . He made it and sent it as a birthday / Christmas present for me ...darn nice of him....its really neat . See if I can find a pic ...Hunting i use these.
Attachments
Those are really cool. My luck I'd wind up with a pocket full of powder though. If I could figure out how to keep it handy and safe from accidentally emptying it I'd definitely like one of those. I worry about the other push style brass doodad thigymajig too.
Lately I've been trying out priming from the horn, but it's too slow for a couple of the stations on the woods walks we do that are timed on priming, firing and scored on accuracy.
The doodad is going to go back to its home in a sleeve with an open bottom on my bag strap so if I do accidentally push it hopefully the powder falls to the ground instead of getting piled up where it can catch a spark.
I use a priming do-Nicky that discharges 4 grains. 1 pump is enough.
That's a good idea.
Well i have had to change up my primer. It's brass with the small plunger spout. The brass body has split open, it's got to be a rolled joint line. I took my arrow saw & cut it into where the crack has stopped. Then i have drilled an deer antler with a hole big enough to push the primer case into it & glued it sealing it tight.
Last edited:
- Joined
- Feb 3, 2022
- Messages
- 955
- Reaction score
- 1,423
I prime from the cartridge, the way the infantry manual instructs.
Uncle Miltie
50 Cal.
I’m not hc,pc or any kind of c 
- Joined
- Mar 6, 2022
- Messages
- 181
- Reaction score
- 213
I’m not hc,pc or any kind of c
i hate to admit i like that idea
Mike in FL
50 Cal.
I use this little horn with a do-hickey that drops 3 grains. I only pump once anymore is just a waste.
outdoorsman60
32 Cal
That is awesome
This is awesome!I’m not hc,pc or any kind of c
- Joined
- May 6, 2013
- Messages
- 4,347
- Reaction score
- 10,047
It was darn nice of him , just out of the blue ! . Beautiful little primer . I use it around the shop as I prime from my main horn in the field . It'll be handy at a range .
Priming horn with one of those brass plunger thingys cause that is just like the original mountain men did it. 
