• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Building yet another NW gun

Shop deals on ebay
L & R
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Rob M. said:
The buttplate against your shoulder ? You dont feel anything unpleasant in the least ....Oh ! The comb ! No , it doesn't hurt on recoil or anything like that . The comb on a Fusil de chasse can really pop you in the cheek but thats because of the drop , no the NW gun is pretty straight pull ,the recoil doesn't pop you .... Funny , just had a customer here last weekend and he asked , worried , about the same thing so I'm makes his with a Willets type comb , more taper at the comb , more rounded .
Click to expand...
The stocks on most reproduction Fusil de chasse guns is greatly exaggerated. The shape was much more graceful on originals, both Tulle and St. Ettiene.
 
Rob M. said:
Current build ... 58" barreled NW Trade Gun . I call it " The Long Tall Texan ' as its headed to Texas after completion . European walnut plank of wood , parts were supplied by the customer , I usually make most of the parts . The side plate is a awesome old North Stat side plate , wish it were mine ! Today is get the buttstock in roughed in shape and then tang screw and trigger guard mount . Almost time to test fire it ?!
Click to expand...
How is the customer going to transport the thing when it is finished with a barrel that long?
I am sure it will be a nice piece nonetheless.
 
smoothshooter said:
How is the customer going to transport the thing when it is finished with a barrel that long?
I am sure it will be a nice piece nonetheless.
Click to expand...
No clue bud ... His decision on barrel length . Keep in mind I messed up and said 58" barrel it was a 48" , which is still a pain puttin it in the truck ! LOL ...
 
Rob M. said:
S

Sorry bud I really don't know . Guessing .... I guess that it was just a common type of nail at the time , I dont think there were round shank nails then . Horse shoe nails are too big so I imagine it was just a small sized easily obtainable nail ... Boot sole nail sounds plausible !
Click to expand...
Nails were hammered out, one at a time. With practice multiple nails could made rather quickly after everything was brought up to heat.
I have seen at least 2 references from the American colonial and immediately post-colonial period of families of “ Nailers “ passing through small towns and settlements in a wagon and stopping, setting up a small forge, and making nails to order if needed. It was considered “ low blacksmith work “ done by the lower class and any wives or children in the family pitched in if they were big enough to swing a light hammer or carry wood for the forge fire.
Sometimes when someone was moving out of a dilapidated house or barn they would burn the structures down and collect the nails from the ashes so they be used on the next house or cabin they might build.
 
Last edited:
smoothshooter said:
Nails were hammered out, one at a time. Always square. With practice, a hand full of nails could made rather quickly. I have seen at least 2 references from the American colonial and immediately post-colonial period of families of “ Nailers “ passing through small towns and settlements and making nails to order. It was considered “ low blacksmith work “ done by the lower class and any wives or children in the family pitched in if they were big enough to swing a light hammer or carry wood for the forge fire.
Sometimes when someone was moving out of a delapidated house or barn they would burn the structures down and collect the nails from the ashes so they be used on the next house or cabin they might build.
Click to expand...
 

Similar threads

R
Latest build - English export fowling piece
2
Replies
21
Views
1K
Noeyebrows
N
K
Traditions Kentuckey pistol build complete
Replies
6
Views
336
Black_Feather
Black_Feather
dave_person
Making a Rev War Period British Carbine
Replies
19
Views
800
fireman1
fireman1
mnmuzzleloader
  • Locked
WITHDRAWN 15 Gauge Side by Side English Muzzleloader Shotgun
Replies
13
Views
2K
TCMonts
TCMonts
dave_person
Making an English Turn-off Pistol for Fort Dobbs
2
Replies
34
Views
2K
shorthair
S

Latest posts

Back
Top