Safe or naw
- Thread starter EcoGang18
- Start date
Help Support Muzzleloading Forum:
when in doubt toss it out. I wouldn't trust that as far as I could throw it! And that's what I would do with it.
I would replace it.
I'm in with the rest there's no way I'd trust that.
Destroy that breech plug so it CAN'T be used (hammer the threads or saw it in half)
Next time, you need to drilled straight perpendicular into the antechamber with the breech-plug installed and leave it installed.
Never filed the threads, lesson learned.
Sorry bud, good luck
Next time, you need to drilled straight perpendicular into the antechamber with the breech-plug installed and leave it installed.
Never filed the threads, lesson learned.
Sorry bud, good luck
.
There are many examples of a notched breech. That notch is too deep. It cuts through all the threads. You need at least 3 to 4 threads to seal the breech.
Ditto with all the above.
ronaldrothb49
45 Cal.
- Joined
- Oct 31, 2021
- Messages
- 846
- Reaction score
- 1,453
When you fire a rifle the gas created will take the path of least resistance. You have nothing sealing that breech plug. Stop and think what is behind that breech plug.
Mgbruch
40 Cal
Nuff said.
no!
that is trash!
that is trash!
- Joined
- Mar 5, 2010
- Messages
- 729
- Reaction score
- 315
I'd definitely get another breechplug!
You already knew the answer. You are just hoping someone says it is ok. Well....it is NOT ok. It is an ugly accident waiting to happen.
Only keep that one to duplicate the tang measurements on a new one so it sits down into the existing inlet, then toss it in the trash. Do not shoot with that one.
As already stated, with a patent breech, drill straight through into the anti chamber. No notching needed.
As already stated, with a patent breech, drill straight through into the anti chamber. No notching needed.
flatcreek
40 Cal
One of the problems with the internet is, people search till they find the answer they want.
