Opinions on product for glass bedding a stock that was overcut by a newbie

Hey guys, have a relative who overcut a barrel inlet by a pathetic margin. (Mostly on the bottom) He decided glass bedding could help him out. He asked me which product would be the best, Devocon or Acraglass? I have no clue.
My question is: Which of the two aforementioned products would be best? He has chiseled out a 42" swamped barrel in a Curly Maple stock. Please only respond with opinions if you have used the product or know someone who had a result to comment on.
Thanks
Larry

AcraGlass I have used it for years it is great

Larry (Omaha) said:

Hey guys, have a relative who overcut a barrel inlet by a pathetic margin. (Mostly on the bottom) He decided glass bedding could help him out. He asked me which product would be the best, Devocon or Acraglass? I have no clue.

Click to expand...

I use both, depending on the application. For this type of ‘opportunity’ I would suggest Acraglas with a small amount of dye added so as to match the final finish color of the stock.

Having used numerous bedding products my current preference is JB Kwick. It sets in 6 minutes.

Since this project is a m/l barrel , low tech methods can be used. Harbor Freight epoxie , quick setting 5 min. type is adequate and cheap. Brown epoxie dye from Brownells is good to tint the glue making it almost invisible. The most frustrating part of the bedding process is barrel release agent. I quit using messy uncertain products like Brownells release agent, bear grease , and etc.. Since the mid 1970's , I've had exceptional success using grocery plastic bag film. This is easy beyond belief. Cut the plastic so a strip of it will cover the stock inlet side of the barrel with one thickness , and tape the two edges of the strip at the top flat of the m/l barrel to hold it in place. Saran Wrap can be used , but Grocery plastic is free. Another benefit seen , is the entire barrel need not be done it once , but bedding sections of the channel makes it easy and manageable. Another universal barrel bedding tip , a snug clamp can be used at the breech plugs end , but it's not good to clamp the rest of the barrel solidly into the barrel channel so as to possibly bend the barrel in the loose channel. Very gentle clamping is best . I've used this barrel bedding process many times with total success. Straight barrels , tapered and flavored barrels that don't fit , and are poorly inlet , cracked stocks in the barrel channel , etc.. I try to accomplise tasks quickly , and w/o excess unnecessary expense. Fifty plus yrs. of barrel bedding when necessary............oldwoodchas.

any pictures available? it may be in this case that a thin wood veneer epoxied into place would be advantageous. see dave_persons post about the Elliot carbine.

oldwoodchas. said:

The most frustrating part of the bedding process is barrel release agent. I quit using messy uncertain products like Brownells release agent, bear grease , and etc..

Click to expand...

I’ve been using the same can of Johnson Paste Wax as a release agent for over 40 years without issue. Believe they no longer make the JPW, but any good neutral colored shoe polish would work.

deerstalkert said:

any pictures available? it may be in this case that a thin wood veneer epoxied into place would be advantageous. see dave_persons post about the Elliot carbine.

Click to expand...

No, but thanks anyway.
Larry

If you're going to use Accraglass, (which is a very good product....I've used it often on "those other rifles") I'd suggest getting the "Gel" type as opposed to the original. The original is sort of like trying to heard cats.

Acra glas is good but runny. I've used cabosil many times to thicken it up. Avoid the quick setting epoxies unless it's a small job with no chance of error. The stuff can set up while you're still trying to get things into place. The idea of glueing in a shim is an excellent one.

https://www.amazon.com/Cabosil-Fume...cphy=9030195&hvtargid=pla-1657304407579&psc=1

SDSmlf said:

I’ve been using the same can of Johnson Paste Wax as a release agent for over 40 years without issue. Believe they no longer make the JPW, but any good neutral colored shoe polish would work.

Click to expand...

I think mine dates back to the early/mid 70's.

Have been using AcraGlas since the 70's, good stuff if ya follow directions and don't try to hurry or cut corners. Have everything handy and within arms reach before ya start so ya don't have to try and hunt down, dig out, or wish you had available. Once you start there is no time for a coffee break.