One side or two

flatcreek · 2024-11-19T10:09:56-0500

When your lubing a patch with a grease type lube such as mink oil or bore butter.
Do you lube just the bore side of the patch or both. I've tried both ways and a have not noticed a difference.

bigstick6017555 · 2024-11-19T10:11:48-0500

one side

French Colonial · 2024-11-19T10:12:04-0500

My theory is that if you grease just the outside of the patch when it squeezes into the bore it squeezes it through to the other side as well.

Grimord · 2024-11-19T12:43:25-0500

I only grease one side (the side that goes down the bore into the rifling). I like to keep the (dry side) on the ball. I believe the patch better grips the ball if it is un-lubed, but as stated in the previous comment by French Colonial, the grease will squeeze thru the patch to the ball.

stubshaft · 2024-11-19T18:40:12-0500

I use #40 pocket drill for patching material and even though I swipe only one side of the patch in TOTW Mink Oil it wicks through the material giving total saturation.

deerstalkert · 2024-11-19T18:53:49-0500

I punch out 100 or so patches. I then toss them like potato chips into my melted bear fat/ beeswax concoction then scoop them out with the wife's strainer spoon thingy. with a popsicle stick I separate the them on a paper plate. when they cool off and the lube solidifies, they really are like potato chips.
I try to make the patches the same diameter as the barrel and when i put them over the bore i press a pocket into the bore making a good seat for the ball.

Rob M. · 2024-11-19T19:38:56-0500

Bore side ....

Stykbow · 2024-11-19T19:47:18-0500

I melt the lube and dunk the patches in it.

One side or two

Help Support Muzzleloading Forum:

flatcreek

40 Cal

bigstick6017555

40 Cal

French Colonial

62 Cal.

Grimord

Fyrstyk

stubshaft

40 Cal.

deerstalkert

Cannon

Rob M.

70 Cal.

Stykbow

50 Cal.

Similar threads

Latest posts

One side or two

Help Support Muzzleloading Forum:

40 Cal

40 Cal

62 Cal.

Fyrstyk

40 Cal.

Cannon

70 Cal.

50 Cal.

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!