naterflint
32 Cal
I have a traditions Kentucky rifle and I’m wondering. What double set trigger will be a good option for it. I have one but a single trigger and I’d like to upgrade it.
Traditions, Kentucky rifle
- Thread starter naterflint
- Start date
Help Support Muzzleloading Forum:
A double set trigger will likely require changing the trigger guard as well.
To be honest with you, Traditions is not the highest quality muzzleloader rifle. Rather than trying to convert yours, which is iffy and going to require probably not just the parts but inletting and mating to lockwork for same. It's going to be a much bigger project than you're imagining. Best off, IMO, to just aquire a new Kentucky-style rifle that already has double-set triggers. Pedersoli makes one such, and if you're into kit building, the Kibler Southen Mountain Rifle is in the same ballpark:
https://kiblerslongrifles.com/products/southern-mountain-rifle-kit-gun-base-price-950
.... and it's better than the Pedersoli.
https://kiblerslongrifles.com/products/southern-mountain-rifle-kit-gun-base-price-950
.... and it's better than the Pedersoli.
ronaldrothb49
45 Cal.
- Joined
- Oct 31, 2021
- Messages
- 845
- Reaction score
- 1,453
If I remember correctly,(that doesn't happen all the time) The tumbler on that lock does not have a fly. That can create some problems with set trigger.
Yoh are correct. Since the set trigger "flicks" the sear to release it, the fly is needed to keep the sear from catching the half cock notch. The lock will need to be changed.
longcruise
70 Cal.
@naterflint I don't think you will gain much by doing the exchange and as stated it's not a drop in and will also require a change of the lock. If the trigger pull is good as is, probably best to leave it as is. (and i don't know why this is coming in bold??)
You're such a bold dude!! That's why!!
AnotherHawkenGuy
Boss Level 9000
On a side note, not to hijack OP’s thread but, is there a single trigger better than the stock trigger for the Kentucky that will drop in that is better and isn’t floppy?
put a flat spring on mine to hold trigger forward
naterflint
32 Cal
Ok thank you. I do plan to make make a better flintlock, but I gotta kill something with this one first
naterflint
32 Cal
Ok thank you. I do plan to make make a better flintlock, but I gotta kill something with this one first
I have an older Jukar rifle which is the same as Tradions. The Gun Works has parts including a tumbler and fly for pretty reasonable. I bought a spare set of springs for my lock from them. My lock benefited a lot from polishing all the surfaces that rub. Mine also like to be well lubed. Doing this has given me a very smooth trigger that is not too heavy.
ronaldrothb49
45 Cal.
- Joined
- Oct 31, 2021
- Messages
- 845
- Reaction score
- 1,453
If you are having problems with a heavy trigger pull I may have a way to help but I need to see a picture of the trigger assembly to see if it will work. I took an old CVA colonial from an impossible trigger pull to about a 3 pound pull using the stock trigger.
naterflint
32 Cal
There was a little screw on this sear that made the trigger lighter. I was just wondering if a double set would fit
- Joined
- Jan 9, 2008
- Messages
- 1,947
- Reaction score
- 2,212
with the adjustment screw on the tumbler, the let off can be made light enough, to the point of not needing a double set trigger.
ronaldrothb49
45 Cal.
- Joined
- Oct 31, 2021
- Messages
- 845
- Reaction score
- 1,453
I have one of those locks on an old pistol kit. May have an extra of that tumbler screw and spring would have to look tomorrow. They used a couple different trigger set ups and their is one that I can modify just the trigger to get a 2 to 3 pound trigger pull from the stock trigger with no changes on the LOP
- Joined
- Aug 25, 2003
- Messages
- 6,519
- Reaction score
- 1,480
You might look into a single set trigger, R E Davis sells them, and there are others.
bldtrailer
Pilgrim
you can trash the old trigger and buy a trigger from track of the wolf and pin it through the stock higher and it will lower the trigger pull as I did for my grandsons traditions
https://americanlongrifles.org/forum/index.php?topic=73189.msg729835#msg729835
with the right load you can make them shoot 100yrd sight in target
naterflint
32 Cal
What load do you use?
I have the Traditions Kentucky (flint) and with the stock lock I get just under 3 lbs. pull, which is as light as I want to go . I added a CVA bridle and polished all lock parts. Added a spring to trigger so no floppy flop.
Similar threads
