@sportster73hp please post pics & weight of your sxs flinter? Thanks.
CVA SxS Brittany .410
- Thread starter Gum Slough Muzzleloader
- Start date
Help Support Muzzleloading Forum:
sportster73hp
50 Cal.
- Joined
- Jan 16, 2020
- Messages
- 1,069
- Reaction score
- 853
sportster73hp
50 Cal.
- Joined
- Jan 16, 2020
- Messages
- 1,069
- Reaction score
- 853
Factory says 7.71 pounds.
Sorry for photo format not sure why it doesn’t show directly
Sorry for photo format not sure why it doesn’t show directly
Pic is fine 
- thanks!
What a beautiful weapon... lust... covet....
@Gum Slough Muzzleloader , Buy one so I can live vicariously through you
!
- thanks!What a beautiful weapon... lust... covet....
@Gum Slough Muzzleloader , Buy one so I can live vicariously through you
!sportster73hp
50 Cal.
- Joined
- Jan 16, 2020
- Messages
- 1,069
- Reaction score
- 853
It feels good in the hands, sweeps smoothly, and with two locks who needs a rear sight.
Why do you do this to me Hammer, why?Pic is fine
What a beautiful weapon... lust... covet....
@Gum Slough Muzzleloader , Buy one so I can live vicariously through you
It's bugging me real bad.
sportster73hp
50 Cal.
- Joined
- Jan 16, 2020
- Messages
- 1,069
- Reaction score
- 853
I will poke again; Search sxs double rifle from New Hampshire in the search function. He has a nice collection
I saw Pedersoli's SxS .63 caliberflintlock lock
I'll give it a look
sportster73hp
50 Cal.
- Joined
- Jan 16, 2020
- Messages
- 1,069
- Reaction score
- 853
That is the standard. The deluxe has a combination of cut engraving and laser etched/ cut engraving. Bright metalwork and a basketweave checkering.
waterjug
Pilgrim
So a question for shotgun 12 or 16 g mlzder shooters. I'm thinking of shooting a few very few steel shot for waterfowling. Would it be ok to use a wad that is used for reloading a reg shell or should ai use lose steel pellets with a shot card on top of the shot? Maybe 5 shoots on a huntb4 i bring out the sa stoger to finish off my hunt
Waterjug, I have never used steel shot in my 12ga sxs. I'll share what I've read about steel shot in a muzzleloading shotgun.
If you have cromed lined barrels then you are OK to use Is loose shot. If not use should use a 12ga shot cup.
A shot card on top is good to go. You could use an oversized felt Wad with or with out thin shot card. I using a thin shot card would probably keep everything tight.
Good luck.
GSM
I picked up a 16ga flintlock double barrel. They are sweet and this one fits me like a glove. I had to add the pictures at the end of that thread thanks to Photoshop holding the Tinypic pictures for ransom.Them flintlock doubles drive me cray too. One day maybe
https://www.muzzleloadingforum.com/threads/double-barrel-16-gauge-flintlock-shotgun.95853/
Last edited:
I'll post a picture of mine for you tomorrow.
