• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Search results

Shop deals on ebay
L & R
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    Molds . . . getting moldy around here.

    I checked and I don't have any spare molds of the sizes requested in my horde. Notice I said "spare" but I am getting to the age where I should start thinning down the heard.
  2. B

    Molds . . . getting moldy around here.

    Ames, I checked today and no .520 mold. thompson50 I will check tomorrow but I don't think I have a spare .570 FishDFly, Yes, I am planning on being at the AL-KY longrifle show in January. I did not get to make it last year and I sure missed it. I will look for you there.
  3. B

    Molds . . . getting moldy around here.

    Hi Richard, I do tend to collect things! : )
  4. B

    Molds . . . getting moldy around here.

    Ames I don't recall a 520 mold but when I go out to the shop today I will check my list to be sure. It is odd that I didn't realize I was a mold collector until one day I noticed I had a lot of molds!
  5. B

    Molds . . . getting moldy around here.

    OK, so I decided to get most of my molds in one place and make a list. I ended up with a few duplicates mostly 1and two cavity dupes. The one size range I have the most in was 40 caliber.
  6. B

    WITHDRAWN Roger & Spencer Revolver #1

    Fnfalguy Check your personal notifications.
  7. B

    Parker-Hale Musketoon Lock Question

    Windini A properly built lock will not have a washer in it. Apparently it was installed to try to correct some type of error in manufacturing.
  8. B

    Parker-Hale Musketoon Lock Question

    Windini It would appear your sear pivot hole was drilled at an angle which is cocking the sear arm out from the plate. This could cause multiple problems. I have attached a picture of my lock out of my Birmingham manufactured Parker Hale musketoon. As you can see in the picture there is...
  9. B

    12L14 barrel comes apart

    I have to wonder about a couple of things. You mentioned that the rifle was a full stocked swamped barrel. Check and see if the fracture occurred where the barrel pin lug was dovetailed into the barrel at that point. This is a "no no" for the construction of a swamped barrel in a gun. Just a...
  10. B

    If you were given a TC Hawken barrel, what would you do with it?

    Dirigo, Since you are more or less going to go to a practice type of building before you go to your desired $1000 kit I would suggest you go ahead and build up a rifle with the TC barrel. It will give you some practice before you tear into a more expensive kit. There is nothing mechanically...
  11. B

    Revolver Identification

    The way the market is running right now I would not be hesitant to ask $400 for each since they are boxed sets.
  12. B

    Butt Stitches and Drawstrings

    Even the buckle is first class!
  13. B

    7 Pounder Rifle Muzzle Loader

    Wonderful detail!
  14. B

    what a difference 5 grains makes!

    Nice little group BUT! Now go back and shoot three targets using five shot groups. Measure the very worse one, that is what you and your rifle can depend on at that given range. NEVER DEPEND ON THREE SHOT GROUPS FOR SHOWING THE POTENTIAL FOR ACCURACY! The cardinal rule for any testing is "Is...
  15. B

    Show and Tell

    Beautiful Job!
  16. B

    Progress. Soon back to carving

    Labrat, You have a unique style to your engraving, I like it!
  17. B

    Preferred Cleaning Patches?

    The fabric that I have found that works best is baby diaper material from your local "China Mart". Over the years I have tried many different fabrics and this is what I have found best to get into the rifling grooves.
  18. B

    New member and Lover of the Old West

    DStovall Beautiful work! Welcome to the forum.
  19. B

    First time poster from East AL

    Delguewithane Welcome to the forum. I thought you might be interested in going to this event. I am sure you will have a good time and might even want to join in the shooting. Here is a copy of the cover letter and a list of matches. They are fun to shoot in. If you are not familiar with...
  20. B

    .325 round balls

    If you need a odd sized mold go here; Callahan Bagmolds & Accoutrements They are well made molds and available in standard sizes or odd sizes.
View older results
Back
Top