Search results

You could bore this out and make a smooth bore? or clean it up for an extra barrel for your CVA. steg49

Last Price drop. $60 shipped. steg49

45 Cal., 9 inch CVA pistol barrel, rifling is still there but overall poor condition, I think it could be cleaned up (?) Nipple comes out as does the cleanout screw. Winter project? See photos. Cost is $25 shipped, personal check or USPO money order. steg49

Answered your PM.

PM comming

Reproduction of an 1875 Ketland trade pistol made by Meddlesex Village Trading Co. 60 cal. Flintlock. Lightly used, brass barrel, under side of barrel AUD UDR India #1174 25/9/79. Barrel is clean (I couldn't get a good picture but it is clean) I replaced the ramrod. See pictures ask questions...

Dropping price to $60 shipped. steg49

Trigger, hammer, spring trigger guard, trigger plate (un finished), pins and screws (see photos). $60 shipped. steg49

Do a search on this form for venting a percussion rifle. steg49

I posted yesterday that some shooters (not me) have drilled a vent in the drum cleanout screw or drilled a hole just in front of the nipple in the drum. It acts similar to a hot shot nipple that has a hole drilled into the side of the head of the nipple. Also helps with hammer kickback. I'm...

Yes, looks like a vent hole to me, haven't seen one drill in the breech plug like that. Over time the heat of the powder venting will erode the metal so might be good to drill and tap for an 8X32 Allen Head screw. take it out every tine your done shooting and clean the threads so no rust will...

How big is the hole? I have seen were shooters have drilled a small hole in the cleanout screw at the end of the drum, and I have seen holes drill into the drum just ahead of the nipple. This is done to allow back pressure to blow debris and clear the powder channel. Very similar to what a...

I'm rebuilding an 1870 unmentionable (here on this site) but all the small parts are interchangeable with 1861-1870 Springfield muzzleloading muskets. Small parts like the but plate, barrel bands and trigger guard screws and lock bolts. Thanks for the response. steg49

Looking for parts for a civil war musket, I have the stock but now need some parts to go with it, rough condition would be OK as they are 170 years. Let me know what you have. thanks steg49

Flint62Smoothie you're the first, steg49

Sorry I forgot my name I'l do that now! :doh:

E. Rayl Blunderbuss barrel 4 gauge (1.054 inches bore diameter), 20 inches long, 22 inches with tang. Muzzle is 1.975 inches. Slight amount of surface corrosion, no pitting, still shows machining marks. Inside of barrel clean, two underlugs have been put onto the underside of the barrel and...

I don't understand, these were there for over a week with no response. Now there are 3 in this order #1 Snelling, #2 reloader4410, #3 Relic shooter. I will PM if the list gets shorter. Thanks for the response truly appreciated. steg49

ONLY ONE LEFT.

Just pulled the barrel AHU UDR INDIA E/5083 11/10/89. These have been used by the previous own but the locks only required minor cleaning, so I hadn't pulled the barrel. All was clean on the underside. steg49