• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

1861 Rifle Musket Norwich .58 caliber

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 21, 2023
Messages
217
Reaction score
342
Location
Eastern High Plains
I picked up this rusted up, pitted, abused derelict a few months ago. I was debating to part it out, or bringing it back to life. A number of parts were already missing, the stock was substantially battered with dents the nose of the stock was broken and missing. i had some of the missing parts and pieces from previous projects, I thought I would have a go at it.

I made no attempt to sand out the rust, instead I boiled and steamed the metal parts and carded them bring out the blueing from the rust conversion. The wood was cleaned and dents steamed to little avail. A new nose was made and new nose cap installed. Four coats of BLO to finish it up. Still need a ramrod and rear sight for it, but once again a shooter.
 

Attachments

  • 7EA64362-07B7-40AA-B30D-FB9BD2A5F7FA.jpeg
    7EA64362-07B7-40AA-B30D-FB9BD2A5F7FA.jpeg
    868.8 KB
  • 1D59C01C-774E-4593-8A5D-EAB194283AB8.jpeg
    1D59C01C-774E-4593-8A5D-EAB194283AB8.jpeg
    1.5 MB
  • 437780BA-077E-449C-A98C-5ECE40D2DDA4.jpeg
    437780BA-077E-449C-A98C-5ECE40D2DDA4.jpeg
    930.1 KB
  • E284A787-2E69-4CE1-9724-EEB1153DA8D3.jpeg
    E284A787-2E69-4CE1-9724-EEB1153DA8D3.jpeg
    1.1 MB
  • BB76F428-F2BE-4AA1-9DBA-0F07015DC087.jpeg
    BB76F428-F2BE-4AA1-9DBA-0F07015DC087.jpeg
    796.4 KB
  • 3059401F-D620-4C12-991C-69992566C101.jpeg
    3059401F-D620-4C12-991C-69992566C101.jpeg
    925.9 KB
  • E084EBB0-60E5-4419-B945-82AC9F3F325D.jpeg
    E084EBB0-60E5-4419-B945-82AC9F3F325D.jpeg
    2.5 MB
The bore was a female dog to say the least! I soaked the bore in vinegar for about a week, changing it out with a good brushing every other day. It had a crud ring towards the end of the breach that the patches and jag would stick to, even broke the jag threads from the cleaning rod. Took the nipple off added some 4F and a musket cap to shoot it out. I even lost a bore brush down the bore, that took four firings to get it about 6 inches away from the end. I then used a coat hanger to fish the brush out. All in all it was an experience. Crud ring is gone and the lands and groves are standing proud! Looks to be a good shooter to me!
 
Back
Top