.50 Caliber T/C Renegade "kit' barrel for sale. Good bore with not rust or pits. Barrel is browned and drilled & tapped for a weaver scope mount. The scope holes have been plugged with screws, and the thimbles have been replaced with brass ones from a T/C Hawken. $65.00 plus shipping. Shipping will run around $18.00. Postal Money Order only please. PM me if interested.
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
SOLD 50 Caliber Renegade barrel
- Thread starter Grimord
- Start date
Help Support Muzzleloading Forum:
- Status
I forgot to add that this is a percussion barrel.
I can send you pictures if you give me your e-mail address.
"Copy" the picture into your devices temporary memory. Come back to this topic. Use the "Paste" method in your new post and the forums software will put your picture into it. That's all there is to it.
If your on a computer you can open a new "tab" and find your pictures. Then Copy them, one at a time and click on the tab button to get back to your post.
Then, Paste the picture into your new post. Once done you can select the other Tab to get back to your pictures so you can Copy the next one to Paste into your post. You can enter quite a few pictures rapidly by using this method.
If your on a computer you can open a new "tab" and find your pictures. Then Copy them, one at a time and click on the tab button to get back to your post.
Then, Paste the picture into your new post. Once done you can select the other Tab to get back to your pictures so you can Copy the next one to Paste into your post. You can enter quite a few pictures rapidly by using this method.
Zonie, thanks for the how to, but you are talking to a computer dinosaur. I am lucky to get to this forum, and switching from one file to another is quite frustrating to me. I usually screw the whole works up. I will give it a try.
Here are some pictures, I sure hope this works. I also take terrible pictures as you can see.
- Joined
- Feb 24, 2019
- Messages
- 101
- Reaction score
- 56
I’d say you got it figured out
From the pictures, it looks like rust on the barrel but it isn't. There are some worn areas of the browning from use, but no rust.
Sold pending funds.
- Status
Similar threads
