- Joined
- Sep 16, 2019
- Messages
- 82
- Reaction score
- 20
Title says it. Lyman Plains Bullet mold 50 cal 395 grain
Thank you
Thank you
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
CLOSED 50cal LYMAN plains Bullet mold
- Thread starter beginner
- Start date
Help Support Muzzleloading Forum:
- Status
- Joined
- Sep 16, 2019
- Messages
- 82
- Reaction score
- 20
Thank you for the information If you don’t mind me asking what barrel (twist rate and make) are you using?
The Lyman boolit was too tight for my T/C High Plains Sporter, it dropped from the mold at .508. I bought a plain base mold from NOE for the .500 S&W that drops .504 and it shoots lights out and you don't have to hammer it in. It's listed as a .502-404-SWC. Mine weigh in at 410gr out of straight lead.
- Joined
- Sep 16, 2019
- Messages
- 82
- Reaction score
- 20
Thank you for replying and the information I will check it out
I'm sorry for not saying the rifle is a 1-48 twist with the shallow rifling that T/C used a lot
- Joined
- Sep 16, 2019
- Messages
- 82
- Reaction score
- 20
Still looking
- Joined
- Sep 16, 2019
- Messages
- 82
- Reaction score
- 20
Bought one thanks
- Status
