• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD 54 cal T/C White Mountain Carbine barrel. Trades entertained.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Aug 14, 2022
Messages
2,042
Reaction score
5,282
Location
idaho
Open to trades
As the bore scope makes things look way worse than they are, I have included the classic light drop pic for comparison. The barrel is in fine shootable form.

This is a complete White Mountain Carbine percussion 22" 54 Cal barrel with 1:48 twist for sale. Pre QLA. The bore has no rust and is clean, but does have some minor pitting in places. I did chemically remove any rust. Outside is in excellent condition.

This will fit a Renegade stock as it is 1" across flats and the barrel lug is in the right place.

Turn your 50 cal Renegade into a 54 Cal Carbine!

$190 plus $30 shipping.

wmc1.jpg

wmc2.jpg IMG_0023.JPG IMG_0024.JPG IMG_0025.JPG



light.jpg
There is 12 3/8" from base of breech to underrib and an additional 1 5/8" you could cut from the rib and not affect screw holes or the underrib support for the ramrod. giving you a total of 14" from breech end to underrib

under.jpg


Nipple threads are excellent.
nip1.jpg nip.jpg
 
Last edited:
Status
Not open for further replies.
Back
Top