• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

CLOSED Antique Original 32 Cal Tapered Barrel, Muzzleloader, 1 1/8 to 1 1/16 x 32 5/8"

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

AZ Muzzleloaders

Dave Puvogel
Joined
Apr 30, 2018
Messages
569
Reaction score
892
Location
Prescott, Arizona

Original antique muzzleloader rifle barrel. Tapered from 1 1/8" to 1 1/16" x 32 5/8".
No breech plug, but barrel is threaded for a 5/8" breech plug. Bore not rusted or pitted, but has a matte finish. Would probably be a good candidate to have bored out to a larger dimension. There is a 3/32" hole in the top flat, probably for a sight. Still plenty of steel to bore out.
Weighs 7lb 11 oz as is. Ramrod thimbles soldered on. $180 plus actual shipping.

IMG_6320.JPG
IMG_6321.JPG
IMG_6322.JPG
IMG_6323.JPG
IMG_6325.JPG
IMG_6326.JPG
 
Status
Not open for further replies.
Back
Top