• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Aqua Fortis

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Zutt-man

45 Cal.
Joined
Feb 12, 2021
Messages
698
Reaction score
1,175
Location
Kansas
Good morning gents. Looking through several flintlocks and photos on google, it got me thinking: Has anyone tried aqua fortis on cherry, or any other stocks other than maple? Obviously you’re not going to have figure like a curly maple, but maybe it would bring out the subtleties in a stock?

I figured I’d share the photo process of a stock I did last year with curly maple as an attention grabber.
 

Attachments

  • 7EEA5C1C-CFB4-4908-88A3-BBD01C27A46A.jpeg
    7EEA5C1C-CFB4-4908-88A3-BBD01C27A46A.jpeg
    203.2 KB
  • 0071F476-48FC-4A41-BA6A-D355FB79B823.jpeg
    0071F476-48FC-4A41-BA6A-D355FB79B823.jpeg
    227.1 KB
  • 57E4E905-3CC8-437E-AB76-11E4B3009C0E.jpeg
    57E4E905-3CC8-437E-AB76-11E4B3009C0E.jpeg
    197.4 KB
  • 8F0864F6-0BAF-4BDB-BA53-0A5A27012ED4.jpeg
    8F0864F6-0BAF-4BDB-BA53-0A5A27012ED4.jpeg
    170.8 KB
  • 0DD0327D-5351-4C0A-B892-72AEF1A22E29.jpeg
    0DD0327D-5351-4C0A-B892-72AEF1A22E29.jpeg
    193.6 KB
  • BAD26680-C2C0-4BB4-B26C-A7667FFBDCE4.jpeg
    BAD26680-C2C0-4BB4-B26C-A7667FFBDCE4.jpeg
    177.1 KB
Most people use drain cleaner with lye on cherry but your question peaked my interest, I am out to the shop and will have pictures of aqufortis on cherry in a matter of minutes.

My guess is it will turn it black, we will see....

I am back; AQ gives a deep burgundy color on cherry. This is one coat of aqufortis, blushed and covered with a thick coat of Tru-oil. Looks to me that this would be a good stain to leave dark in some areas and scrub back to lighten others.

AQ cherry.JPG
 
Last edited:
Most people use drain cleaner with lye on cherry but your question peaked my interest, I am out to the shop and will have pictures of aqufortis on cherry in a matter of minutes.

My guess is it will turn it black, we will see....
I would like to see how drain cleaner work? This is the first time I have heard of using drain cleaner.
 
Most people use drain cleaner with lye on cherry but your question peaked my interest, I am out to the shop and will have pictures of aqufortis on cherry in a matter of minutes.

My guess is it will turn it black, we will see....

I am back; AQ gives a deep burgundy color on cherry. This is one coat of aqufortis, blushed and covered with a thick coat of Tru-oil. Looks to me that this would be a good stain to leave dark in some areas and scrub back to lighten others.

View attachment 120993
Wow. Thanks for that. My next gun I want to be a fowler of sorts, but I’ve always wanted a dark cherry look to it. This may be the ticket.
 
Potassium dichromate will darken cherry. I found some on ebay. Cherry and Osage orange are photo sensitive leaving them in sunlight will darken them. Over a long time Osage orange will turn almost black. I've seen it on an NDN bow iI got to handle in a museum.
 
Here is aqufortis on hickory after blushing and without any finish, the finish will bring out a few more red tones. I use aqufortis on my ramrods and like the color as it come close to matching the stock wood.
 

Attachments

  • AQ and hickory.JPG
    AQ and hickory.JPG
    90.7 KB
I've always been a walnut guy and have never done a curly maple stock or used aqua fortis before, and I have a couple of questions. The rifle I'm building has a sliding wood patch box lid/cover. I was wondering how one should finish this. Do you use aqua fortis on the interior of the patch box? Should I use aqua fortis on the whole sliding wood cover including the bottom? What about the dove tails? Any info would be appreciated.
 
For giggles, I did one layer of aqua fortis on the bottom side of a spalted silver maple coffee table. I have pictures of both the bottom (wet and dried) and top (last picture) for reference. The top was treated with tried and true. From the photos it’s hard to tell, but there was actually a good amount of curl, albeit small and tight, towards the center of the slab. You can notice some larger bands towards the edge in spots
9970190D-C8B6-488C-AF68-1EA2ABA5A10F.jpeg
ABE02FD0-29DE-4A8D-AD02-0D4238042784.jpeg
F97B3EBE-2DB1-4B94-8AD4-121BE2D5CB26.jpeg
93A24385-DD8C-4CD6-B398-F40DF9875E77.jpeg
3F9E4E60-63F6-4AB7-9238-B1FBB2B2253A.jpeg
A23010D3-43D9-4126-ADE9-9488FAE574B3.jpeg
FD132307-2E45-4447-B271-7404B2C07341.jpeg
 
Back
Top