• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Armi San Marco Colt Walker

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

kh54

45 Cal.
Joined
Jan 26, 2021
Messages
703
Reaction score
1,126
Too many guns, too little time... This ASM Walker has a 1968 proof date. It had evidence of having been fired when I acquired it but it is very clean and appears almost new. Bluing and case colors are practically 100 percent. The grip has some small dings/handling marks. The action and lockup are tight and the bore is clean and shiny. I thoroughly cleaned and polished all internal parts but the action does want to snag once in awhile just as the hammer is being cocked. I just don't feel like tearing it down again, so I'm selling for a little less than comparable ASM Walkers have been selling for on Gunbroker, typically between $400 and $450 plus shipping.

$400, including shipping, USPS insured, CONUS only please.
 

Attachments

  • IMG_5571 (2).JPG
    IMG_5571 (2).JPG
    292.1 KB
  • IMG_5570.JPG
    IMG_5570.JPG
    314.7 KB
Even though so few were made originally, I think every collector should have a reproduction or two to play with. (Hint…)
 
Hi Folks. New/corrected information!
  • I took apart the gun, cleaned it again, polished it again, and fixed the little snagging problem with the hammer. (It was just a high edge on the cam on the hammer that engages the bolt.) Everything functions as it should. Soooooo, I plan to hold out for $400, shipped. That way my time will have been worth a little less than minimum wage. (But it's a hobby, so I'm not complaining.)
  • I had intended to ship only by UPS but my fingers slipped when I wrote the OP. I can ship UPS insured and they will honor it. USPS will not because of their own policy. Unlike ATF, USPS doesn't make a distinction between modern and "antique" firearms. (Look for previous posts on MF to read what others discovered.) But, if someone wants, I can ship USPS. Just know that you have no recourse if the postal service loses or damages it.
 
I did. Sorry I was at the range and didn’t have good service so I don’t think my first attempt to respond worked. I replied to your PM. Thanks!
 
I just noticed that last post was missing the word “pending”! Sorry for any confusion!
 
Status
Not open for further replies.
Back
Top