The one from middlesex looked it was finished with some type of spray on varnish, had clumped up spots in the seems around the lock. The veteran arms one was done better, hand finished i think. Middlesex certainly does not provide anything close to what is pictured in their catalog.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Authenticity of Veteran Arms Brown Bess Muskets
- Thread starter Aglukan
- Start date
Help Support Muzzleloading Forum:
The one from middlesex looked it was finished with some type of spray on varnish, had clumped up spots in the seems around the lock. The veteran arms one was done better, hand finished i think. Middlesex certainly does not provide anything close to what is pictured in their catalog.
Learn to use the colon, makes the written word much easier to not get confused.
- Joined
- Jul 5, 2012
- Messages
- 2,263
- Reaction score
- 3,625
I figured the giant box with the persons name was clear enough.
You know what they say about assuming?
- Joined
- Nov 1, 2018
- Messages
- 3,866
- Reaction score
- 2,898
Indian made guns are made out of firewood.
I’ve seen better quality wood at Home Depot and Lowes.
OMG!
I absolutely love any thread about Indian muskets since they bring out the best in our members.
From metallurgy or mid 18th manufacturing processes / politics and now grammar.
I'm not taking sides or commenting one way or the other.
But this is just bananas. As an RN and one that worked Baylor ER, "colon" takes on a WHOLE new meaning with "Learn to use".
- Joined
- Nov 26, 2005
- Messages
- 5,223
- Reaction score
- 10,881
Hi Aglukan,
I have no idea what differences there are between Loyalist, Veteran Arms, and Middlesex Valley Traders sold guns. Working with reenactors I have had guns from all of those suppliers in my shop at some point. They all required extensive work on the locks. We rarely accept India-made guns to work on anymore because they all have been massive consumers of time and the end result works mechanically but is never very satisfying relative to historical accuracy, which is usually our goal for any work we do. I will say that none were any more historically accurate than any other and none were very well made compared with pre-industrial 18th century standards. Here are some examples of locks that came in to be worked over.
Tumbler holes too big, holes off center, screws drilled at wrong angles, dished out tumbler holes so the flintcocks ground against the lock plate, etc. Despite the deficiencies, working on these and other poorly made flintlocks taught me an important lesson. All of them worked somewhat and several had been decent performing locks for many years before they came to me. It demonstrates that flintlocks need to be well made but they don't need the super fine tolerances lauded today on CNC machined locks. That level of precision is overkill and unnecessary. Flintlocks are not jet engines needing precise parts rotating thousands of RPMs for hours. The best flintlocks of all time were made by hand in England during the 1st quarter of the 19th century. They were hand made using simple jigs, templates, and cutters. Even crudely made locks can work pretty well without a great level of precision. However, they need proper geometry and properly heat treated parts. Sometimes India-made locks fail in both respects.
dave
I have no idea what differences there are between Loyalist, Veteran Arms, and Middlesex Valley Traders sold guns. Working with reenactors I have had guns from all of those suppliers in my shop at some point. They all required extensive work on the locks. We rarely accept India-made guns to work on anymore because they all have been massive consumers of time and the end result works mechanically but is never very satisfying relative to historical accuracy, which is usually our goal for any work we do. I will say that none were any more historically accurate than any other and none were very well made compared with pre-industrial 18th century standards. Here are some examples of locks that came in to be worked over.
Tumbler holes too big, holes off center, screws drilled at wrong angles, dished out tumbler holes so the flintcocks ground against the lock plate, etc. Despite the deficiencies, working on these and other poorly made flintlocks taught me an important lesson. All of them worked somewhat and several had been decent performing locks for many years before they came to me. It demonstrates that flintlocks need to be well made but they don't need the super fine tolerances lauded today on CNC machined locks. That level of precision is overkill and unnecessary. Flintlocks are not jet engines needing precise parts rotating thousands of RPMs for hours. The best flintlocks of all time were made by hand in England during the 1st quarter of the 19th century. They were hand made using simple jigs, templates, and cutters. Even crudely made locks can work pretty well without a great level of precision. However, they need proper geometry and properly heat treated parts. Sometimes India-made locks fail in both respects.
dave
It was confusing, i was reading the quote and going back over what Dave wrote, I’m not going to apologize for being confused, as it it was confusing. The person who wrote it explained themselves and thats that.
- Joined
- Jun 17, 2019
- Messages
- 8,383
- Reaction score
- 9,771
Many replica guns nowadays have "lawyer barrels", which are super heavy and thick because of the liability involved.
- Joined
- Jun 17, 2019
- Messages
- 8,383
- Reaction score
- 9,771
Excellent comments from someone who knows first hand. Thanks.Hi Aglukan,
I have no idea what differences there are between Loyalist, Veteran Arms, and Middlesex Valley Traders sold guns. Working with reenactors I have had guns from all of those suppliers in my shop at some point. They all required extensive work on the locks. We rarely accept India-made guns to work on anymore because they all have been massive consumers of time and the end result works mechanically but is never very satisfying relative to historical accuracy, which is usually our goal for any work we do. I will say that none were any more historically accurate than any other and none were very well made compared with pre-industrial 18th century standards. Here are some examples of locks that came in to be worked over.
Tumbler holes too big, holes off center, screws drilled at wrong angles, dished out tumbler holes so the flintcocks ground against the lock plate, etc. Despite the deficiencies, working on these and other poorly made flintlocks taught me an important lesson. All of them worked somewhat and several had been decent performing locks for many years before they came to me. It demonstrates that flintlocks need to be well made but they don't need the super fine tolerances lauded today on CNC machined locks. That level of precision is overkill and unnecessary. Flintlocks are not jet engines needing precise parts rotating thousands of RPMs for hours. The best flintlocks of all time were made by hand in England during the 1st quarter of the 19th century. They were hand made using simple jigs, templates, and cutters. Even crudely made locks can work pretty well without a great level of precision. However, they need proper geometry and properly heat treated parts. Sometimes India-made locks fail in both respects.
dave
- Joined
- Jul 5, 2012
- Messages
- 2,263
- Reaction score
- 3,625
Unfortunately for many earlier pieces it is either india made or trs kit and builder at 3 times the cost. I would love to see better competition but realistically they have no competition. The recently dredged up topic on the double barrel pistol is a good example. Of course it could be better but with no option take it or leave it.
It wasn’t bad grammar, i would call it poor internet etiquette to quote someone or miss-quote someone accidentally. I work in IT i see this all the time. Keep our conversations straight, clear and to the point creates less confusion, and upsets less people such as yourself.
Hi Aglukan,
I have no idea what differences there are between Loyalist, Veteran Arms, and Middlesex Valley Traders sold guns. Working with reenactors I have had guns from all of those suppliers in my shop at some point. They all required extensive work on the locks. We rarely accept India-made guns to work on anymore because they all have been massive consumers of time and the end result works mechanically but is never very satisfying relative to historical accuracy, which is usually our goal for any work we do. I will say that none were any more historically accurate than any other and none were very well made compared with pre-industrial 18th century standards. Here are some examples of locks that came in to be worked over.
Tumbler holes too big, holes off center, screws drilled at wrong angles, dished out tumbler holes so the flintcocks ground against the lock plate, etc. Despite the deficiencies, working on these and other poorly made flintlocks taught me an important lesson. All of them worked somewhat and several had been decent performing locks for many years before they came to me. It demonstrates that flintlocks need to be well made but they don't need the super fine tolerances lauded today on CNC machined locks. That level of precision is overkill and unnecessary. Flintlocks are not jet engines needing precise parts rotating thousands of RPMs for hours. The best flintlocks of all time were made by hand in England during the 1st quarter of the 19th century. They were hand made using simple jigs, templates, and cutters. Even crudely made locks can work pretty well without a great level of precision. However, they need proper geometry and properly heat treated parts. Sometimes India-made locks fail in both respects.
dave
Such Amazing information Dave, and great examples to follow. Thank you again. I’m surprised that some of these gun shops would actually sell such poor quality, they could probably do a better job.
I agree.
Sam squanch
69 Cal.
- Joined
- Oct 9, 2019
- Messages
- 3,171
- Reaction score
- 4,535
Sam squanch
69 Cal.
- Joined
- Oct 9, 2019
- Messages
- 3,171
- Reaction score
- 4,535
In all seriousness- these India gunmakers need to offer a miquelet lock. Precise fitting is not required, with a good mainspring and properly tempered frizzen they spark every time! The trigger pull takes some getting used to though, but for a musket it’s ok.
- Joined
- Jul 5, 2012
- Messages
- 2,263
- Reaction score
- 3,625
Believe it or not I have an Indian made miquelet musket. Aside from the finish on the steel it is very comparable to one from TRS.
TRS locks come as unassembled castings with sprues still attached. So India miquelets come as slightly polished unassembled castings with the sprues still attached?
- Joined
- Jul 5, 2012
- Messages
- 2,263
- Reaction score
- 3,625
Comparing as completed guns. TRS lock came assembled when my friend bought it many years ago. Actually I am going to have to rebuild the rifle shoppe lock as it doesn't work as well as the indian.
Similar threads
- Locked
