Hi I am new to percussion guns and have a question please. I have an 1835 percussion double shotgun with hook fit barrels. I feel that the barrel fit in the hook is a bit tight, they obviously should not be a loose fit, but how tight should they be? I have blacked the hook and there seems to be no high spots but the barrels have to be forced down is this correct? Thanks.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Barrel fit
- Thread starter DUNKS
- Start date
Help Support Muzzleloading Forum:
Treestalker
Treestalker
- Joined
- Mar 24, 2014
- Messages
- 4,051
- Reaction score
- 3,748
- Location
- Third Pond from the Great God Helios
There should be mild resistance, but not to the point of 'force'. Check the top of the lugs for resistance and also consider the wood at the rear 3 inches or so. Also check your underlug on the barrel to stock fit. Just ideas, hopefully better minds will offer advice.
- Joined
- Apr 15, 2016
- Messages
- 3,515
- Reaction score
- 3,804
X2 on checking the wood. That may be too snug and causing the resistance.
Use some red lipstick to color the barrels. Insert the barrels in the stock and see where the lipstick is rubbed off the barrels and where the stock is marked. You may be able to remove a very little bit of wood in the stock if the only interference is at the largest diameter of the barrels when they enter the stock.
You may just want to leave it as is if the only interference is when the barrels are started and the final settling is easy.
You may just want to leave it as is if the only interference is when the barrels are started and the final settling is easy.
DOUBLEDEUCE 1
69 Cal.
- Joined
- Jan 25, 2008
- Messages
- 4,165
- Reaction score
- 877
Is the shotgun antique or reproduction ? If it’s antique and has been used quite a bit, then the barrel fit should be fine. If the gun is new, it might be only a matter of settling in.
if you can, pull the standing breech from the stock. Look behind it to see if there is something stuck to the back like a tiny splinter of wood or rust. Check the top of the opening in the breech where the hook makes contact. Try connecting the breech with the barrels off the stock. You might get a small amount of resistance If it is not worn too much. You won’t want any play between the breech and the end of the barrels because of the recoil.
i have a Pedersoli 12 gauge double barrel. It’s been well used and there is still a bit of resistance when dropping the barrels back into the stock.
if you can, pull the standing breech from the stock. Look behind it to see if there is something stuck to the back like a tiny splinter of wood or rust. Check the top of the opening in the breech where the hook makes contact. Try connecting the breech with the barrels off the stock. You might get a small amount of resistance If it is not worn too much. You won’t want any play between the breech and the end of the barrels because of the recoil.
i have a Pedersoli 12 gauge double barrel. It’s been well used and there is still a bit of resistance when dropping the barrels back into the stock.
There are several reasons for a tight fit for a hooked breech , the most common is the standing breech at some period the top main screw and the small screw from the trigger guard to the bottom of the standard breech between the slots for the barrel hooks have been tightened too much making the barrels when fitted not square on .
Feltwad
Feltwad
- Joined
- Feb 28, 2019
- Messages
- 3,521
- Reaction score
- 4,487
1835 Eh So cant take it back .Most all the suggestions made have merit if knowing Felt Wad Ide consider that if the tang nail is cockeye , not true' North & South' that should indicate its been over tightened and some seem to like to' shuffle their feet ' in.. Point of interest how do you know its 1835 ? There are a lot of good lads in your area , I used to go the Mick Long's a lot . And the' Sharpe's' Armourer Bill Whittlam.s not far away but there getting on ,Are you anywhere Nr Sutton Bonnington ? If so PM me I know a very capable fellow can sort it out .
Cheers Rudyard
Cheers Rudyard
Thanks.of course I can’t prove it’s age. It is obviously old, twist barrels .makers name on the action is Sherwood. He was a Portsmouth gunmaker and 1834 was the middle of his trading time. Proof mark is for black powder up to 1850, after which the bore size was added. This gun does not have this. Thanks for the offer I will consider it after the lockdown.
Hello DUNKS. This difficulty putting barrels in is some times due to the way you are holding them slightly out of line. Check the seats in the Break-off have no rubbish tucked in it. A gun that old should jump together when you whistle.(Like a good faithful OLD DOG).If I can help PM me. I'm in NWLeics. Are you an MLAGB member. If not become one as there's a lot of local help in our area,most using originals. Good NEW YEAR to you and all the rest in MLF. STAY WELL> OLD DOG.
