-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Brass
- Thread starter Desert Dawg
- Start date
Help Support Muzzleloading Forum:
I should probably keep opinions to myself, but I don’t think much looks worse than brass mounts polished to a degree that they rival a 57 Chevy bumper.
When I got discharged from the Navy I stopped polishing brass.
Simichrome has another excellent use. Glue a scrap of leather to a small (2" x 6") board, and rub a few small dollops of the Simichrome into it. It is one of the best strops I've found for putting an excellent edge on knives, chisels, etc.
However, don't be like a friend of mine and try to use it like a sharpening stone, trying to shave off the surface by pushing the blade into the stone - drag that edge over the leather with good bit of downward pressure!
Polecat, you went into the wrong branch of the Navy, as airplanes don't have any brass to polish.
However, don't be like a friend of mine and try to use it like a sharpening stone, trying to shave off the surface by pushing the blade into the stone - drag that edge over the leather with good bit of downward pressure!
Polecat, you went into the wrong branch of the Navy, as airplanes don't have any brass to polish.
Well, it’s mostly on the Bess. Ncos don’t cotton to lazy soldiers. Unless, of course, they are amairicun soldiers and then rust and corrosion are the norm. Mine was a rescued amairicun musket… took a lot to get it un rusty and such.Somebody has to play the part of the greenhorn.
Apparently, as the Navy I was in you either painted it or polished it. Actually, it wasn't too bad as I was an Operations Specialist in the Gulf of Tonkin.
Camouflaged paint on a ML looks worse. WAY worse.
A workmate had been a submariner. He had a story of his crew polishing a large piece of brass, and it was a big job. After their time off they took over the sub from the previous crew, who had painted the brass black so they wouldn't have to polish it. So his crew stripped off the paint and polished it just to pi$$ them off.
I'm not into the highly polished mirror like brass, but that's how it turns out after filing it all smooth and to proper contour, removing machining and file marks, then polishing. Once it's dulled to a warm gold I think it looks about right.
mustard like....
aussie pete
40 Cal
Yeah. Just the opposite, Johnny Tremain. So many years in the Army! 23 years of polishing brass has done it for me; while firearms are maintained to a strict level, brass is into a natural decline toward aged patina on all my muzzle loaders. The smell of Brasso gives me flashbacks.
Heck, I don't shave any more either!Cheers, Pete
- Joined
- Dec 8, 2017
- Messages
- 1,942
- Reaction score
- 1,263
I use 320 grit then 400 grit, then I use a slow speed stropping wheel with Autosol metal polish.
Basic training Fort Knox 1966 in old WWII barracks. If it was metal we Brasso'ed it. Surprised we did not have to Brasso the armored vehicles.
Just remembered, we painted the rocks bordering paths.
morehops52
50 Cal.
When it was new I would polish it up every so often. Flitz and auto polishing compound worked well. I got over it and haven't polished it in decades.
- Joined
- May 28, 2021
- Messages
- 498
- Reaction score
- 499
I was in during mid to late 70s, with the 1/10 Cav at Ft. Carson, CO. If it moved, salute it. If it didn't, whitewash it! Spent time racking the rocks in front of the Troop HQ building. Good times had by the NCOIC!
- Joined
- Nov 1, 2018
- Messages
- 3,867
- Reaction score
- 2,900
I start with 150 and end at 320 with most brass, then i hit with a blending wire wheel to give it a nice matte finish.
Personally i don’t like brass super smooth and shiny, it doesn’t age well.
Different than reenactors. They seem to feel it a badge of honor to have a crusty musket
Pete G
76 Cal.
I think that most reenactors aren’t serious shooters. I know that I wouldn’t shoot a live round out of some of the stuff I have seen at reenactments.
user 34300
54 Cal.
- Joined
- Nov 25, 2019
- Messages
- 1,743
- Reaction score
- 2,124
Polishing with a power wheel will round off details and dishes out screw holes. Power polishing is shunned by quality builders. On the other hand lots of guys want the brass to gleam, to each his own.
Brass was scraped rather than filed or sanded, historically.
I remove all evidence of casting by whatever method works best. Usually that is files. I then use sandpaper to take it to the 320 level. All sanding is done with a solid backer block. I then blend with maroon scotchbrite pads. Finally I go over it with brass black or cold blue to make it black. I then rub back with scotchbite or pumice and oil, on the places where it would have naturally have worn spots from handling. After that I forget is exists as far as polishing.
JIm Kibler demonstrated and abrasive stick the formed to the work by being friable. I think it was a video for the Colonial rifle. The sticks worked fast and maintained the contours of the brass. I have been meaning to try them.
Brass was scraped rather than filed or sanded, historically.
I remove all evidence of casting by whatever method works best. Usually that is files. I then use sandpaper to take it to the 320 level. All sanding is done with a solid backer block. I then blend with maroon scotchbrite pads. Finally I go over it with brass black or cold blue to make it black. I then rub back with scotchbite or pumice and oil, on the places where it would have naturally have worn spots from handling. After that I forget is exists as far as polishing.
JIm Kibler demonstrated and abrasive stick the formed to the work by being friable. I think it was a video for the Colonial rifle. The sticks worked fast and maintained the contours of the brass. I have been meaning to try them.
