Breech plug removal

[lbothell]

I’m posting this here bc most of the ppl on the building side would know this answer, I didn’t want every Tom **** and Harry saying their ideas hahah. So got a jag stuck in my traditions Crockett, broke off the tip. The jag had a tapper and went down into that patient breech we all love and completely broke off. Now I’m thinking I’m going to have to take the breech plug out that way I can get it out but wasn’t sure best route to go. I have a friend who has the tools but was looking to see if there was anything in particular that needs to be done. Also and this is just an idea/ question, would trying to put some powder in the drum and fill that up and try to set off a charge possibly work? Just seeing if someone has done that, I know I’m not the first, or last, Guy to do this hahah

 

[SDSmlf]

I’m posting this here bc most of the ppl on the building side would know this answer, I didn’t want every Tom **** and Harry saying their ideas hahah. So got a jag stuck in my traditions Crockett, broke off the tip. The jag had a tapper and went down into that patient breech we all love and completely broke off. Now I’m thinking I’m going to have to take the breech plug out that way I can get it out but wasn’t sure best route to go. I have a friend who has the tools but was looking to see if there was anything in particular that needs to be done. Also and this is just an idea/ question, would trying to put some powder in the drum and fill that up and try to set off a charge possibly work? Just seeing if someone has done that, I know I’m not the first, or last, Guy to do this hahah

Name isn’t Tom, **** or Harry, so just ignore my response if you want.

If you are still with me, Traditions breeches are a little tricky to remove, but doable. Long before I would consider removing the breech I would explore a couple of options. First, assuming the jag and patch are the only thing in the bore, trickle some powder (the finer the better) into the bolster with the nipple removed, replace the nipple and shoot it out. Remember to reseat the jag before a second attempt if it doesn’t come out the first time. You may want to place a Dixie Cup or similar over the muzzle. The hole in it will tell the jag is out. If you don’t care for that idea, consider compressed air. If still not the correct answer, find a zerk fitting that matches the nipple threads, install the fitting in place of the nipple and pump the jag out with grease.

If none of the above work, may be time to consider breech plug removal.

 

[lbothell]

Name isn’t Tom, **** or Harry, so just ignore my response if you want.

If you are still with me, Traditions breeches are a little tricky to remove, but doable. Long before I would consider removing the breech I would explore a couple of options. First, assuming the jag and patch are the only thing in the bore, trickle some powder (the finer the better) into the bolster with the nipple removed, replace the nipple and shoot it out. Remember to reseat the jag before a second attempt if it doesn’t come out the first time. You may want to place a Dixie Cup or similar over the muzzle. The hole in it will tell the jag is out. If you don’t care for that idea, consider compressed air. If still not the correct answer, find a zerk fitting that matches the nipple threads, install the fitting in place of the nipple and pump the jag out with grease.

If none of the above work, may be time to consider breech plug removal.

Thank you for the reply! And I was with you all the way, I think I will try to shoot it out first and go from there. Just worried if it doesn’t come out is all but I think it will. I’ll try each idea and I’ll pull the breech last then

 

[lbothell]

Okay I just went and tried it it’s out thank you much!

 

[SDSmlf]

Good for you. Rather anticlimactic.

 

[lbothell]

Good for you. Rather anticlimactic.

Hahah yes it was, have got a lot stuck in a muzzleloader but never wedged something in like that and then broke the tip. Wasn’t sure if it would budge but it shot out and hit the tree beside my truck so it won’t bother me anymore. Thanks again for the tip!

 

[user 34300]

Shoot it out.

 

[kyron4]

This is a good lesson for everyone. Never start with the "last resort" option, always work your way up to that point.

 

[lbothell]

This is a good lesson for everyone. Never start with the "last resort" option, always work your way up to that point.

Yes I agree

 

[Sam squanch]

Depends on the gun , and if it’s yours. I get something stuck in my own gun that I know what is down there, I’ll shoot it out. A gun brought to me, an old antique, or I got at a store or yard sale? DON’T shoot it out! Could be anything down there, from mud, ball bearings with smokeless powder behind them.

 

[user 34300]

In this case the OP himself broke the jag off. Anyway it looks like he resolved it.

 

[lbothell]

In this case the OP himself broke the jag off. Anyway it looks like he resolved it.

I was pretty sure it hit the tree last night but since it was dark I wasn’t sure but proofs in the pudding

 

[XVIIc Wheelock]

Great solution! Happy for you!

 

[BadDaditood]

Nice “ shot in the dark”!!

 

[Rob M.]

I was pretty sure it hit the tree last night but since it was dark I wasn’t sure but proofs in the pudding

LMAO !!! Awesome !!!

 

[boberator]

I’m posting this here bc most of the ppl on the building side would know this answer, I didn’t want every Tom **** and Harry saying their ideas hahah. So got a jag stuck in my traditions Crockett, broke off the tip. The jag had a tapper and went down into that patient breech we all love and completely broke off. Now I’m thinking I’m going to have to take the breech plug out that way I can get it out but wasn’t sure best route to go. I have a friend who has the tools but was looking to see if there was anything in particular that needs to be done. Also and this is just an idea/ question, would trying to put some powder in the drum and fill that up and try to set off a charge possibly work? Just seeing if someone has done that, I know I’m not the first, or last, Guy to do this hahah

I have blown rags and once a broken worm out by loading a little powder in from the vent after removing the nipple. It sometimes takes several such loads to blow the stuff down range.

 

[longcruise]

I was pretty sure it hit the tree last night but since it was dark I wasn’t sure but proofs in the pudding

Well done . I put a jag through several sheets of drywall leaning in the garage. Should have gone with a tree.