• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Cannon fuse where to get

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 27, 2020
Messages
838
Reaction score
753
Location
Florida Panhandle
I have depleted my supply of cannon fuse and I installed a nipple so I can shoot with percussion cap. I have looked on internet sites but they do not reply to my question. I would like to buy 100 feet of 3/32, 1/8, or 5/32. I don't even remember what size was my favorite.

With so many scam sites it would be good to find one that was legit. I am not doing Paypal they can stuff that. I will use Visa and that is it.
 
I have depleted my supply of cannon fuse and I installed a nipple so I can shoot with percussion cap. I have looked on internet sites but they do not reply to my question. I would like to buy 100 feet of 3/32, 1/8, or 5/32. I don't even remember what size was my favorite.

With so many scam sites it would be good to find one that was legit. I am not doing Paypal they can stuff that. I will use Visa and that is it.
You can also get some from Dixie gun works. Hazmat fee does apply. 😕
 
Back Creek bought a 5,000' spool a few months ago and I bought the first 25'. I expect he still has a few feet left. BTW, it's the green fuse and I believe that indicates the diameter, in this case about 1/8th. in.

https://blackpowderva.com/
The website does not have a search function so I sent an email for length and diameter of waterproof fuse.
 
While you are boiling your gun powder dip in lengths of cotton string, I usually make them about 2 yards long, as you pull it out, run it between 2 gloved fingers to remove excess residue & hang to dry. Once dry cut to length. done
 
Back
Top