Cleaning/work stand for long rifles

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Nathan Ripley

36 Cal.
Joined
Sep 12, 2006
Messages
54
Reaction score
0
I saw a pattern for a cleaning and work stand for long rifles and I have forgot where. I was wanting to build one now that I have a long rifle. The stand was about chest high and free standing. It had an open box shelf for your junk as well. Any help?
 
DSCN0528t1.jpg


Heres one posted on here a while back that I saved an image of. :hmm:

Davy
 
I carry this ML range box which has a bottom that extends forward and has crescent shaped gun holders, ball notches, ramrod L shape and a short starter hole.

There is a bit of wood to mount it onto a table and keep it from sliding back due to the weight of hte guns. The top is a hinged flap with a readily available latch and chain. The corners are finished with brass corner protectors.

The inner compartment is high enough for powder cans and has a special divider for that purpose as well. There is another divider purely for strength.

PICT0118.jpg

PICT0120.jpg

CS
 
Here's the bench that I put together from scrap lumber:

bench1.jpg


These are easy to construct and ya can't live without it. :grin:
Scott
 
All of these look great. Thank you all for posting your pics. Sure gives me some ideas.
 
here's my version of the same work stand mounted to my work bench.............bob

327197.jpg


327199.jpg


327201.jpg
 
WB,
Where did you get the hardware for the clamp of your stand? I am also touched that you cleaned the shop for my pictures! :grin:
 
it's always like that....what's that saying "a clean shop is a sign of a sick mind" or is it a dirty shop is a sign....oh i don't know i do have a sick mind though i think :rotf: ....any way i got the clamp at lee valley[url] tools.com[/url]....the t-nut and threaded rod at home depot :v ............bob
 
Last edited by a moderator:
Back
Top