• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WITHDRAWN Contemporary .40 Flintlock

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

Steel Hayes

Collector of cheap antiquities
Joined
Feb 7, 2021
Messages
246
Reaction score
560
A 58” OAL .40 , lock has been tuned(very fast ignition), with a touch hole liner. Double set triggers and a great bore.

Dovetail sight has been replaced by a peep sight(which is uncanny accurate), the dovetail has been filled in with lead.
Asking $700 plus shipping.
PayPal, check or money order.
IMG_2603.jpeg
IMG_2584.jpegIMG_2585.jpegIMG_2586.jpegIMG_2587.jpegIMG_2589.jpeg
 
Last edited:
Hello is this a Original or a recent build? Any idea who build it? Names on barrel?
Just a guess, I’d say it was built in the 80’s.
No names and no markings.
The lock has been gone through by Cabin Creek.
 
I see you stated the rifle has an overall length of 58" but do you know what the exact barrel length might be? Also is the lead easy to remove from that rear dovetail and is the peep sight removeable ? Just asking hypotheticals here as I am questioning buying a .40 caliber rifle as my first muzzleloader.
 
The barrel is 42”, the lead would just need to be heated to remove. The peep sight can be removed by using a piece of string or thread(it’s on with an adhesive thats non-permanent).
 
The barrel is 42”, the lead would just need to be heated to remove. The peep sight can be removed by using a piece of string or thread(it’s on with an adhesive thats non-permanent).
I dont have the best eyesight in the world so the peep sight would be a huge help. I know this may sound strange but could you get a photo of the front sight picture through the rear peep sight ? I have looked through some peeps before that I just cant see squat through and some that I can. If you do decide to take a photo could you PM it to me. If not understandable this is an unusual request im sure.
 
I’ll try and have it up for you in just a bit.
 
Trying to get my camera to focus through the pep sight is quite the fun time.
I’ll see if I can get my good camera out tomorrow and get a better photo for you.
I will say that looking through the pep sight and lining up on the front blade, the sight makes a small black dot that does the trick on aiming.
 

Attachments

  • IMG_2614.jpeg
    IMG_2614.jpeg
    1.2 MB
Trying to get my camera to focus through the pep sight is quite the fun time.
I’ll see if I can get my good camera out tomorrow and get a better photo for you.
I will say that looking through the pep sight and lining up on the front blade, the sight makes a small black dot that does the trick on aiming.
Even with the blur it does seem to fill out quite well and give a wide picture through the rear peep.
 
Status
Not open for further replies.

Latest posts

Back
Top