• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WITHDRAWN REDUCED CVA Hawken .50

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Aug 25, 2007
Messages
3,739
Reaction score
5,034
REDUCED. OK. Right up front, this one has a pitted bore. So I would consider it a plinker or maybe one for follow up shot hunting from blind. No, I have not shot it, but have shot similar with good accuracy- for what they are intended for. Finish shows some age wear and use. Nothing heinous. $200 + Shipping.

20240731_101924.jpg
20240731_102000.jpg
20240731_102006.jpg
20240731_102023.jpg
20240731_101932.jpg
20240731_101938.jpg
20240731_101842.jpg
20240731_100954.jpg
 
Last edited:
I have one in 54 and it's a tack driver. Maybe it's an optical illusion but that "pitting" in the barrel looks raised or on the surface?
Just needs more scrubbing with Scotchbrite pad strips. But for stated purpose, should work fine. Maybe shoot conicals and problem solved. It is 1:48.
 
Is it a hooked or button breech? Can you post a picture of the backside of the lock?
 
Status
Not open for further replies.
Back
Top