Brianc thanks for the follow up post and specially the photo. You wouldn't believe how many post here looking for help and then never post a second time.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Cva hawken stuck ball
- Thread starter Brianc
- Start date
Help Support Muzzleloading Forum:
- Joined
- Feb 13, 2020
- Messages
- 3,104
- Reaction score
- 6,991
Well done Sir.
I should get a t shirt with that phrase thanks again guys"Nothing is foolproof to a sufficiently talented fool"
Just in case there is a next time, you don't have to find a matching thread to screw the zerk fitting in. A pointed Plews type (05-045) style held against the nipple or cleanout will work great whether it is percussion or cap lock.
Strangely I have never managed to do this I bought it for 20 bucks because the dealer was afraid of it. There’s crusty powder in the breech that I keep dumping out after breaking it up just having trouble with clearing it. There’s a blockage between the drum and breech soaking in ballistol now
A little hand held steam cleaner is a great tool for such a job.
You can get one on ebay for about 30 bucks.
You can get one on ebay for about 30 bucks.
If people would use the search function, others probably would not post annoying posts. It is a joke around here about stuck balls. There is usually one or two threads started about it per month. We may get three this month since this thread is so early in the month. 
True but then again we can always skip over posts we don't want to read or reply to as well.If people would use the search function, others probably would not post annoying posts. It is a joke around here about stuck balls. There is usually one or two threads started about it per month. We may get three this month since this thread is so early in the month.
Amazing how many times this happens. I frequent a bunch of the local pawn shops looking for muzzleloaders I may be able to save if the price is right. Unfortunately anymore everyone thinks they are still worth a fortune as wall hangers in cabins and etc.
- Joined
- Mar 13, 2020
- Messages
- 7,480
- Reaction score
- 20,983
- Location
- On the Border in Idaho looking at BC
or we can keep this one going as long as the popcorn lasts!If people would use the search function, others probably would not post annoying posts. It is a joke around here about stuck balls. There is usually one or two threads started about it per month. We may get three this month since this thread is so early in the month.
Brianc, use hot soapy water to dissolve the crusty mess. certainly not going to hurt the gun in that condition and will shorten the agony of cleaning someone else's mess.
Woody Morgan
62 Cal.
Looks like this thread might wrap up early.
We can always go bug Britsmoothy about using 4f in Big Ted.
wm
We can always go bug Britsmoothy about using 4f in Big Ted.
wm
This exact!!! AMEN thought I was the only one who thought this way
Boiling water from a tea kettle is doing well but the flash channel is still clogged I usually give these to the 4h as I had a great time with them as a child. I’m going to lap the bore and probably donate it . My grandpa built several long rifles so honestly I cannot say I even really had a production muzzle loader. First custom flintlock at 13. Never did dry ball one.
- Joined
- Mar 13, 2020
- Messages
- 7,480
- Reaction score
- 20,983
- Location
- On the Border in Idaho looking at BC
tongue in cheek. Just because you were raised with custom long rifles, you aren't a real muzzleloader unless you have
1. stuck a ball part way home
2. broke off your ramrod while trying to extract said stuck ball.
3 broke off a drill bit trying to get the stuck ball screw out of the stuck ball.
4. epoxied a range rod to the bore trying to get the broken drill bit out of the stuck ball screw that is stuck in the stuck ball halfway down the bore.
5.stripped off the cleanout screw on your drum trying to trickle ffffg in sufficient amount to shoot the above mess out of the gummed up barrel.
6 started a thread asking if the ffffg is going to blow up your barrel.
7 started a thread for each of the above.
8 started a thread asking how to remove the breach plug so you can get the ffffg out of the barrel and drive all the above out with a piece of rebar
as you are a flintlocker, half of #5 doesn't apply to you!
glad you are salvaging the rifle! i get much satisfaction it giving new life to a neglected gun.
1. stuck a ball part way home
2. broke off your ramrod while trying to extract said stuck ball.
3 broke off a drill bit trying to get the stuck ball screw out of the stuck ball.
4. epoxied a range rod to the bore trying to get the broken drill bit out of the stuck ball screw that is stuck in the stuck ball halfway down the bore.
5.stripped off the cleanout screw on your drum trying to trickle ffffg in sufficient amount to shoot the above mess out of the gummed up barrel.
6 started a thread asking if the ffffg is going to blow up your barrel.
7 started a thread for each of the above.
8 started a thread asking how to remove the breach plug so you can get the ffffg out of the barrel and drive all the above out with a piece of rebar
as you are a flintlocker, half of #5 doesn't apply to you!
glad you are salvaging the rifle! i get much satisfaction it giving new life to a neglected gun.
Actually only reason I mess with thes is the 4h kids. I got a kick out of this one thoughtongue in cheek. Just because you were raised with custom long rifles, you aren't a real muzzleloader unless you have
1. stuck a ball part way home
2. broke off your ramrod while trying to extract said stuck ball.
3 broke off a drill bit trying to get the stuck ball screw out of the stuck ball.
4. epoxied a range rod to the bore trying to get the broken drill bit out of the stuck ball screw that is stuck in the stuck ball halfway down the bore.
5.stripped off the cleanout screw on your drum trying to trickle ffffg in sufficient amount to shoot the above mess out of the gummed up barrel.
6 started a thread asking if the ffffg is going to blow up your barrel.
7 started a thread for each of the above.
8 started a thread asking how to remove the breach plug so you can get the ffffg out of the barrel and drive all the above out with a piece of rebar
as you are a flintlocker, half of #5 doesn't apply to you!
glad you are salvaging the rifle! i get much satisfaction it giving new life to a neglected gun.
DuncNZ
54 Cal.
I have a factory Thompson Center breach plug removal tool in my tool box , I have never used it , it looks like I could sell it on this forum , pity I am 9000 miles away 
- Joined
- Aug 22, 2021
- Messages
- 226
- Reaction score
- 459
T
There needs to be a nipple in the gun in order for a co2 discharger to work. The gun looks like it wasn't taken care of. Be careful when you shoot it.
I can see a "booming" rental business in your future.I have a factory Thompson Center breach plug removal tool in my tool box , I have never used it , it looks like I could sell it on this forum , pity I am 9000 miles away
Similar threads
