• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

External spring wheellocks from Graz

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 26, 2006
Messages
658
Reaction score
49
A few pictures from my visit about 2012

1674647694239.png


I really tried to get photos that showed how deep the parts were. Most photos are square from the side.

1674647965356.png


1674648046617.png
 
Last edited:
ChrisPer,
I have been wanting to make a lock like the one you show last above. It has a very novel way of releasing the scear!
a wedge-shaped that pushes the sear out of engagement. Of course, this was likely from a dual purpose weapon. Have seen similar on a battle axe.
Having said that, I'd like to make up a tinderlock with this type of trigger, just to see how it works!

Yes, It was Michael I believe first posted this enchanting lock!
Thanks for showing it to us again!
 
I was under the impression that all/most of the Tschinke wheellocks were made in the 18th Century. A sort of re-introduction for wealthy hobbyist types for hunting. And usually made in small, rifled calibers. Or, maybe they were made earlier and just refurbished and used for sporting purposes at the time(?) Don't really know. Maybe others can enlighten me. Thanks.

Rick
 
Back
Top