jeepwj992002
45 Cal.
- Joined
- Jan 3, 2007
- Messages
- 918
- Reaction score
- 0
Hey y'all I finally got my melting pot and Lee 360Gr .50 Cal Improved Mini mould from Dixie. I decided to try my hand at casting bullets since I no longer have faith in modern fancy jacketed garbage. I used scrap lead roofing flashing I got from the recyclers. I followed all of the tips and tricks from this forum and here is the result. the bullet rear right is a Dixie 350Gr Maxi Ball for comparison. The bullet that is front right was made by accident. I left the sprue cutter open and poured lead into the mould to help warm it up. The lead shrunk and produced a quasi hollow point. I decided to keep it just for the heck of it.